Computer Cover - Compaq Deskpro EX User Manual

4.3

Computer Cover

1. Prepare the computer for disassembly (Section 4.2).
WARNING: Power is continuous to the system board and power supply even when the power
switch is turned off. To prevent damage to the unit, disconnect the power cord from the power
source or the unit before beginning disassembly procedures.
2. Press in the button on each side of the front bezel to release the quick release cover
latches 1.
3. Slide the computer cover and front bezel forward approximately 1-inch (2.5 cm); then,
lift up and off the unit 2.
To replace the computer cover, reverse the previous steps.
Compaq Deskpro EX Series of Personal Computers 4-3