Technical Information; Application Area - Villager VWM 200 Combo Original Instruction Manual

Villager
●Keeping cables in the shape of -8- and taping together reduce emission.
●Connect earth clamp to workpiece as close to the weld as possible. But the user should be
control whether this situation damage to people and equipment or not.

TECHNICAL INFORMATION

1. TECHNICAL INFORMATIONS
1.1 GENERAL EXPLANATIONS
●VWM 200 combo welding machines are 1 phase, constant voltage and current ( CV and CC )
power sources especially designed for MIG/MAG and MMA welding.
●All the controls of welding power source are placed on to the front panel for easy operation
and monitoring.
●Wire feeding unit is wheel drive and it is installed in the power source.
●Wire feeder contains motor and drived wheel, etc.
●Output voltage of the
voltage adjustment knob.

1.2 APPLICATION AREA

● VWM 200 combo
good choice for steel, stainless steel and aluminium MIG/MAG welding.
● VWM 200 combo
1.3 SYMBOL AND MEANING ON DATA PLATE
Single phase input AC power supply, inverter，Rectifier，Transformer，DC current or voltage
output
MIG/MAG welding or GMAW process
MMA welding process
With MIG (Metal Inert Gas) or MAG (Metal Active Gas) welding also called Gas-Shielded
Metal Arc Welding (GMAW) an arc is maintained between a continuous solid wire electrode
and the work piece. The arc and weld pool are shielded by a stream of inert or active gas. The
process is suitable for most materials and filler wires are available for a wide range of metals.
MIG/MAG welding is inherently more productive than MMA, where productivity losses occur
each time a welder stops to replace a consumed electrode. Material losses also result from
VWM 200 combo
is very good selection for welding 1.2~6 mm thickness metal. It is a very
welding machines are very good selection for MMA welding.
welding machine can be adjusted by a welding
VWM 200 Combo (GB)