Electromagnetic Compatibility (Emc); Electromagnetic Emission - Villager VWM 200 Combo Original Instruction Manual

Villager
●If interference still occurs, the user must take extra measures such as moving the welding
machine, using shielded cables, using line filters, or shielding the work area .
STATIC (ESD) CAN DAMAGE PC BOARDS
●Put on grounded wrist strap before handling boards or parts.
●Use proper static-proof bags and boxes to store, move, or ship PC boards
PROTECTION
●Do not expose the welding machine to rain, protect from water drops and vapour.
OBEY ALL THE SAFETY RULES STATED IN THE MANUAL!

ELECTROMAGNETIC COMPATIBILITY (EMC)

ELECTROMAGNETIC EMISSION

●All electrical equipment generates small amounts of electromagnetic emission due to
current transferring in the equipment. Electrical emission may be transmitted through power
lines or radiated through space, similar to a radio transmitter. When emissions are received
by other equipment, electrical interference may result. Electrical emissions may affect not
only welding machines but also many kinds of electrical equipment like radio and TV
reception, numerical controlled machines, telephone systems, computers etc.
●Welding and cutting machines have been designed to work for professional and industrial
use; for other applications to contact the manufacturers.
●The user is responsible for installing and using the equipment according to the
manufacturer's instructions. If electromagnetic disturbances are detected then it shall be
the responsibility of the user of the equipment to resolve the situation with the technical
assistance of the manufacturer. In some cases this remedial action may be as simple as
earthing the welding the welding circuit, in other cases it could involve constructing an
electromagnetic screen enclosing the power source and the work complete with associated
input filters. In all cases electromagnetic disturbances must be reduced to the point where
they are no longer troublesome.
VWM 200 Combo (GB)