Villager VWM 200 Combo Original Instruction Manual page 23

Villager VWM 200 Combo (GB)
HOT PARTS CAN CAUSE SEVERE BURNS
● Do not touch hot parts.
● Allow cooling time before servicing.
● If needed to hold hot parts, use appropriate tool, insulating gloves and fireproof clothes.
MOVING PARTS CAN CAUSE INJURY
●Keep away from moving parts.
●Keep all doors, panels, and guards closed and secured.
●Wear shoes with metal protection over the fingers.
WORKING IN SMALL AND CONFINED PLACES CAN BE DANGEROUS
●While welding and cutting in small, confined places, always have a trained watchperson
nearby.
●Avoid working in such confined places.
WELDING WIRE MAY CAUSE INJURY
●Do not point the gun toward any part of a human body, other persons or any type of metal
when unwinding welding wire.
●While extracting the wire from the spool by hand, it may spring suddenly and injure you or a
nearby person, protect especially your eyes and face.
●Make sure that there is no one close.
WELDING CAN CAUSE FIRE OR EXPLOSION
●Never weld near flammable material. It may cause fire or explosions.
●Before starting to weld, move flammables away or protect them with flame-proof covers.
●Do not weld on and cut closed tubes or pipes.
●Before welding on closed containers, open and clear them entirely. Welding operations on
these parts must be performed with the utmost caution.
●Never weld containers or pipes containing or which have contained substances that could
give rise to explosions.
Welding equipment warms up so never position them on flammable surfaces.
●Welding sparks can cause fire. For that reason, keep extinguishing means, such as fire
extinguishers, water and sand easy reach.
●Have and maintain security valves, regulators and other valves on the flammable, explosive
and compressed gas circuits in good condition by periodical controls, used for welding and
cutting operations.