Villager VWM 200 Combo Original Instruction Manual page 21

IDENTIFYING SAFETY INFORMATION
• These symbols are being used to identify potential risks.
• When seen a safety symbol in the manual, it must be understood that there is an injury risk
and following instructions must be read carefully to avoid potential risks.
• While welding, keep the third persons and especially the children away from the work area.
UNDERSTANDING THE SAFETY WARNINGS
Read carefully the manual and the labels and the safety warnings on the machine.
• Make sure that the warning labels positioned on your machine are in good order. Renew
the damaged and the missing labels.
• Learn to operate the machine and how to make the controls properly.
• Operate your machine in convenient work areas. Improper modifications affect the safety
of your machine negatively and shorten its lifetime.
SAFETY RULES
ELECTRICAL SHOCK COULD BE FATAL
Installation procedure must comply with national electricity standards and other relevant
regulations and ensure that installation is performed by qualified persons.
● Wear dry, hole-free insulating gloves and body protection.
● Do not touch electrode with bare hand. Do not wear wet or damaged gloves and body
protection.
● Do not touch live electrical parts.
● Never touch electrode while in contact with working surface, ground or another electrode
which is connected to a different machine .
● Protect yourself from electric shock by insulating yourself from work and ground.
Use non-flammable, dry insulating material if possible, or use dry rubber mats, dry wood or
plywood, or other dry insulating material big enough to cover your full area of contact with
the work or ground, and watch for fire.
● Never connect up more than 1 electrodes or wires to the machine
● Turn off the machine, when not in use .
● Disconnect input plug or power before working on machine.
● Frequently inspect input power cord for damage or bare wiring - repair or replace cord
immediately if damaged.
● Be sure input ground wire is properly connected to a ground terminal in disconnect box or
receptacle.
Villager VWM 200 Combo (GB)