Panasonic INDUSTRY LS-400 Series Manual page 9

SPECIFICATIONS
Sensor heads
Type
IEC / JIS / GB standards
conforming type
FDA (Note 2) / IEC / JIS
Item standards conforming type
CE marking directive compliance
Applicable amplifiers
0.2 to 30 m
U-LG mode
0.656 to 98.425 ft
0.2 to 20 m
STD mode
0.656 to 65.617 ft
FAST mode
0.2 to 10 m
0.656 to 32.808 ft
H-SP mode
Operation indicator
Laser emission indicator
Spot-shape adjuster
Protection
Ambient temperature
Ambient humidity
Ambient illuminance
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
Red semiconductor laser,
Class 2 (IEC / JIS / GB)
IEC / JIS / GB standards
Max. output: 3 mW
conforming type
Peak emission wavelength: 655 nm
Red semiconductor laser,
FDA (Note 2) / IEC / Class 2 (FDA / IEC / JIS)
JIS standards
Max. output: 3 mW
conforming type
Peak emission wavelength: 655 nm
Material
Cable
Net weight: 30 g approx.
Weight
Gross weight: 40 g approx.
RF-230(Reflector):
Warning label: 1 set
Labels are written in
Accessories
Japanese, English and
Chinese for compliance
with various standards.
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C
2) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and
Radiological Health) under the FDA (Food and Drug Administration). For details, refer to the Laser Notice No. 50.
3) LS-H22(F) is the set model No. for LS-H21(F) long sensing range spot reflective type sensor head combined with the LS-MR1 lens attachment for line
reflective type. Hence, LS-H21(F) appears on the sensor head itself.
4) The sensing range is the value for the RF-330 [RF-230 for the LS-H92(F)] reflector. In addition, the sensing range is the possible setting range for the
reflector. The sensor can detect an object less than 0.1 m
objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change
the response time or incident light sensitivity.
5) Cable cannot be extended.
Coaxial retroreflective
Class 2
LS-H92 LS-H91
LS-H92F LS-H91F
0.1 to 7 m
(Note 4) 0.328 to 22.966 ft (Note 4)
0.1 to 5 m
(Note 4) 0.328 to 16.404 ft (Note 4)
0.1 to 3 m
(Note 4) 0.328 to 9.843 ft (Note 4)
Orange LED (lights up when the amplifier output is ON)
–
–10 to +55 °C +14 to +131 °F (No dew condensation or icing allowed), Storage: –20 to +70 °C
Incandescent light: 3,000 ℓx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 1.5 mm 0.059 in
100 m/s acceleration (10 G approx.) in X, Y and Z directions three times each
2
0.026 mil
0.026 mil
Enclosure: PBT (Mounting part: PEI), Lens cover: Acrylic
0.1 mm , single core two parallel shielded cables, 2 m
2
Net weight: 30 g approx.
Gross weight: 45 g approx.
RF-330(Reflector):
1 pc. 1 pc.
Warning label: 1 set
Labels are written in
Japanese, English and
Chinese for compliance
with various standards.
0.328 ft
Digital Laser Sensor
Long sensing range spot reflective
Class 1
Class 2
LS-H91-A LS-H21
LS-H91F-A LS-H21F
EMC Directive, RoHS Directive
LS-401(P), LS-401(P)-C2, LS-403
0.1 to 5 m 30 to 1,000 mm
0.328 to 16.404 ft (Note 4) 1.181 to 39.370 in
0.1 to 3 m 30 to 500 mm
0.328 to 9.843 ft (Note 4) 1.181 to 19.685 in
0.1 to 1 m 30 to 300 mm
0.328 to 3.281 ft (Note 4) 1.181 to 11.811 in
Green LED (lights up during laser emission)
IP40 (IEC)
35 to 85 % RH, Storage: 35 to 85 % RH
(10 G max.) double amplitude in X, Y and Z directions for two hours each
Red semiconductor laser, Red semiconductor laser,
Class 1 (IEC / JIS / GB) Class 2 (IEC / JIS / GB)
Max. output: 1 mW Max. output: 3 mW
Peak emission wavelength: Peak emission wavelength:
655 nm 0.026 mil 655 nm 0.026 mil
Red semiconductor laser, Red semiconductor laser,
Class 1 (FDA / IEC / JIS) Class 2 (FDA / IEC / JIS)
Max. output: 1 mW Max. output: 3 mW
Peak emission wavelength: Peak emission wavelength:
655 nm 0.026 mil 655 nm 0.026 mil
6.562 ft long (Connector for amplifier attached) (Note 5)
Net weight: 30 g approx.
Gross weight: 40 g approx.
RF-330(Reflector):
Warning label: 1 set
1 pc.
Explanation label: 1 set
Labels are written in
Japanese, English and
Labels are written in
Chinese for compliance
Japanese and Chinese
with various standards.
for compliance with
various standards.
[LS-H92(F): 0.2 m 0.656 ft] away. Note that if there are white papers or specular
LS-400
SERIES
Diffuse reflective
Long sensing range
line reflective
Class 1
LS-H21-A LS-H22(Note 3)
LS-H21F-A LS-H22F(Note 3)
30 to 500 mm 30 to 1,000 mm
1.181 to 19.685 in 1.181 to 39.370 in
30 to 250 mm 30 to 500 mm
1.181 to 9.843 in 1.181 to 19.685 in
30 to 150 mm 30 to 300 mm
1.181 to 5.906 in 1.181 to 11.811 in
Multi-turn adjuster
–4 to +158 °F
Red semiconductor laser, Red semiconductor laser,
Class 1 (IEC / JIS / GB) Class 2 (IEC / JIS / GB)
Max. output: 1 mW Max. output: 3 mW
Peak emission wavelength: Peak emission wavelength:
655 nm 0.026 mil 655 nm 0.026 mil
Red semiconductor laser, Red semiconductor laser,
Class 1 (FDA / IEC / JIS) Class 2 (FDA / IEC / JIS)
Max. output: 1 mW Max. output: 3 mW
Peak emission wavelength: Peak emission wavelength:
655 nm 0.026 mil 655 nm 0.026 mil
Net weight: 35 g approx.
Gross weight: 45 g approx.
LS-MR1
Lens attachment
Explanation label: 1 set
for line reflective : 1 pc.
Labels are written in
Warning label: 1 set
Japanese and Chinese
Labels are written in
for compliance with
Japanese, English and
various standards.
Chinese for compliance
with various standards.
+73.4 °F.
9