Panasonic INDUSTRY LS-400 Series Manual page 8

8
Digital Laser Sensor
OPTIONS
Designation Model No.
MS-CX-1
MS-CX-2
Sensor head
mounting
MS-CX-3
bracket
MS-CX-4
Sensor mounting
MS-CX-11
bracket for beam
axis alignment
MS-AJ1
MS-AJ2
Universal sensor
mounting stand
MS-AJ1-A
MS-AJ2-A
MS-DIN-2
Amplifier mounting bracket
MS-RF23
Reflector mounting bracket
Amplifier
FX-MB1
protection seal
RF-310
Reflector
RF-33
Reflective tape
RF-31
FX-CH
Bank
selection unit
FX-CH-P
Universal sensor mounting stand
• MS-AJ1 • MS-AJ1-A
With the lateral arm,
Swivel:
360° rotation the sensor can
sense from above
45°
Height
a production line.
adjustment:
45°
150 mm
Forward / back
5.906 in
adjustment
Elevation
approx. 130 mm
angle: ±45°
5.118 in
approx.
Mounting hole
for M6 screw
360 °
Angle
adjustment:
±45°
Reflector Reflective tape
• RF-310 • RF-33
12 mm
0.472 in
0.4 mm
4 mm
0.016 in
0.157 in
24 mm
0.945 in
• RF-31
0.4 mm
0.016 in
LS-400
SERIES
Description
Foot angled mounting bracket
Foot biangled mounting bracket
Flat mounting possible to avoid obstructions caused by the height of the sensor.
Back angled mounting bracket
Protective mounting bracket
Protects sensors preventing beam axis displacement due to shocks.
Mounting bracket that makes fine beam axis alignment possible
after setting the sensor head.
Adjustment angle: up and down, right and left: 4 degrees
Mounting directions: two directions, vertical and horizontal
Horizontal mounting type
Vertical mounting type
Horizontal mounting type
Vertical mounting type
Mounting bracket for amplifier
Mounting bracket for RF-230
10 sets of 2 communication window seals and 1 connector seal
Communication window seal: It prevents malfunction due to transmission signal from another
amplifier, as well as, prevents effect on another amplifier.
Connector seal: It prevents contact of any metal, etc., with the pins
of the quick-connection cable.
For coaxial retroreflective type
Compact reflector
For coaxial retroreflective type
Size: 25.2 × 27.8 × t 0.4 mm
0.992 × 1.094 × t 0.016 in
For coaxial retroreflective type
Size: 9.2 × 9.2 × t 0.4 mm
0.362 × 0.362 × t 0.016 in
NPN input type
Setting for up to 16 laser sensors can be
changed at once by means of external signals.
PNP input type
• MS-AJ2
Swivel:
360°
45°
rotation
45°
Height
Elevation
adjustment:
angle:
150 mm
±45°
5.906 in
approx.
45°
45°
Mounting hole
for M6 screw
27.8 mm
1.094 in
25.2 mm
0.992 in
9.2 mm
0.362 in
9.2 mm
0.362 in
Basic assembly
Lateral arm assembly
Sensing range (U-LG mode)
• LS-H91(F): 0.1 to 7 m
0.328 to 22.966 ft
• LS-H91(F)-A: 0.1 to 5 m
0.328 to 16.404 ft
• MS-AJ2-A
With the lateral arm,
Swivel:
360° rotation the sensor can
Swivel:
sense from above a
360° rotation
production line.
Height
adjustment:
Forward / back
150 mm
adjustment
Height
5.906 in
130 mm
adjustment:
approx.
5.118 in
150 mm
approx.
5.906 in
Mounting hole
approx.
for M6 screw
360 °
45°
45°
Mounting hole
Angle
for M6 screw
adjustment:
±45°
Sensor head mounting bracket
• MS-CX-1 • MS-CX-2
Two M3 (length 12 mm
Two M3 (length 12 mm
0.472 in) screws with
0.472 in) screws with
washers are attached.
washers are attached.
• MS-CX-3 • MS-CX-4
Two M3 (length 12 mm
Two M3 (length 12 mm
0.472 in) screws with
0.472 in) screws with
washers are attached. washers are attached.
Sensor mounting bracket
for beam axis alignment
• MS-CX-11
Two M3 (length 14 mm
0.551 in) screws with
washers are attached.
Amplifier mounting bracket
• MS-DIN-2
Reflector mounting bracket
• MS-RF23
Two M4 (length 10 mm
screws with washers are attached.
Amplifier protection seal
• FX-MB1
Communication
window seal
Connector seal
Bank selection unit
• FX-CH(-P)
0.394 in)