Panasonic INDUSTRY LS-400 Series Manual page 10

10
Digital Laser Sensor
SPECIFICATIONS
Amplifiers
Type
NPN output
Item PNP output
CE marking directive compliance
Supply voltage
Power consumption
Outputs
(Output 1, Output 2)
Output operation
Short-circuit protection
Response time
External input
Laser emission halt
Full-auto teaching /
Limit teaching
Operation indicator
Laser emission indicator
Select indicator
MODE indicator
Digital display
Sensitivity setting
Fine sensitivity adjustment function
Timer function
Timer period
Automatic interference
prevention function
Ambient temperature
Ambient humidity
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
Material
Cable
Cable extension
Weight
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C
2) In case of LS-401(P), 50 mA if 5 to 8 amplifiers are connected in cascade, and 25 mA if 9 to 16 amplifiers are connected in cascade.
3) In case of LS-403, 25 mA if 5 to 16 amplifiers are connected in cascade.
4) The cable is not supplied as an accessory for connector type. Be sure to purchase the optional quick-connection cables given below.
When connecting to SC-GU3 series, be sure to purchase the optional cascading connector unit.
Main cable (4-core): CN-74-C1 (cable length 1 m
Sub cable (2-core): CN-72-C1 (cable length 1 m
Cascading connector unit: SC-71
LS-400
SERIES
Connector type
With upper communication function
LS-401
LS-401P
Normal operation: 950 mW or less (Current consumption 40 mA or less at 24 V supply voltage)
ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 V supply voltage)
<NPN output type>
NPN open-collector transistor
• Maximum sink current: 100 mA (LS-401□) (Note 2) , 50 mA (LS-403) (Note 3)
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 1.5 V or less at 100 mA (Note 2) sink current
at 50 mA (Note 3) sink current (LS-403)
80 µs or less (H-SP), 150 µs or less (FAST), 500 µs or less (STD), 4 ms or less (U-LG) selectable with jog switch
–
Yellow LED (lights up when either output 1 or output 2 is selected)
RUN: Green LED, TEACH • L/D • TIMER • CUST • PRO: Yellow LED
Normal mode: 2-level teaching / Limit teaching / Full-auto teaching / Manual adjustment
Window comparator mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment
Hysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment
Differential mode: 5-level settings (LS-403: 8-level settings)
Incorporated with variable ON-delay / OFF-delay / One shot timer, switchable either effective or ineffective.
1 to 9,999 ms approx. 0.5 ms approx. 1 to 9,999 ms approx.
Incorporated [Up to four sets of sensor heads can be mounted close together. (However, LS-401□ is disabled when in H-SP
mode, up to two sets of LS-403 can be mounted close together when in H-SP mode)]
–10 to +55 °C +14 to +131 °F (If 4 to 7 units are mounted close together: –10 to +50 °C
if 8 to 16 units are mounted close together: –10 to +45 °C
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm
98 m/s
2
Enclosure: Heat-resistant ABS, Transparent cover: Polycarbonate, Push button switch: Acrylic, Jog switch: ABS
– (Note 4)
Extension up to total 100 m
Net weight: 15 g approx., Gross weight: 20 g approx.
3.281 ft), CN-74-C2 (cable length 2 m
3.281 ft), CN-72-C2 (cable length 2 m
LS-403
–
EMC Directive, RoHS Directive
12 to 24 V DC ±10 % Ripple P-P 10 % or less
<PNP output type>
PNP open-collector transistor
Selectable either Light-ON or Dark-ON, with jog switch
Incorporated
<NPN output type>
NPN non-contact input
• Signal condition
• Input impedance: 10 kΩ approx.
<PNP output type>
PNP non-contact input
• Signal condition
• Input impedance: 10 kΩ approx.
Orange LED (lights up when output 1 and output 2 are ON)
Green LED (lights up during laser emission)
4 digit (green) + 4 digit (red) LED display
Incorporated
+14 to +113 °F) (No dew condensation or icing allowed), Storage: –20 to +70 °C
35 to 85 % RH, Storage: 35 to 85 % RH
0.030 in double amplitude in X, Y and Z directions for two hours each
acceleration (10 G approx.) in X, Y and Z directions five times each
328.084 ft is possible with 0.3 mm
Net weight: 65 g approx., Gross weight: 75 g approx.
6.562 ft), CN-74-C5 (cable length 5 m
6.562 ft), CN-72-C5 (cable length 5 m
Cable type
LS-401-C2
LS-401P-C2
• Maximum source current: 100 mA (Note 2)
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 1.5 V or less [at 100 mA (Note 2) source current]
High: +5 V to +V or open,
Low: 0 to +2 V (source current 0.5 mA or less)
High: +4 V to +V (sink current 3 mA or less)
Low: 0 to +0.6 V or open
1 to 9,999 ms approx.
+14 to +122 °F,
0.15 mm 5-core cabtyre cable, 2 m
2
, or more, cable.
2
+73.4
16.404
16.404
4 to +158 °F
6.562 ft long
°F.
ft)
ft)