Winch Wiring Diagram; Motor End Terminal Rotation - KFI STEALTH Series Manual

Hide thumbs Also See for STEALTH Series:

Table of Contents

MODEL #SE25 – 2,500LB (1134KG) WINCH

Winch Wiring Diagram

NEG(-)

42.5

42.3

With some applications, the motor terminals may need to be rotated to avoid interference with other components. If rota-

tion is required please give us a call at 1-877-346-2050 for instructions or visit our website at www.kfiproducts.com and

look in the support section.

LEADS AT DEFAULT POSITION

POS(+)

42.4

42.2

Assembly

Note: Some batteries may require the use of

longer bolts to fasten both the winch wire

ends and the stock vehicle wiring. Use two

M6 x 20mm Bolts (included) if required.

NEG(-)

TO WINCH (-)

(BLUE POST)

TO BATTERY (+)

(RED POST)

LEADS ROTATED 90°

ASSEMBLy

POS(+)

These two posts must

be wired to the battery!

CONTACTOR

TO BATTERY (-)

(BLACK POST)

TO WINCH (+)

(YELLOW)

Table of Contents

Se25