Winch Wiring Diagram; Motor End Terminal Rotation - KFI U45-R2 Operator's Manual

MODEL #U45-R2 – 4,500LB (2041KG) WINCH

Winch Wiring Diagram

NEG(-)
52.5
52.3

Motor End Terminal Rotation

With some applications, the motor terminals may need to be rotated to avoid interference with other components. If rota-
tion is required please give us a call at 1-877-346-2050 for instructions or visit our website at www.kfiproducts.com and
look in the support section.
LEADS AT DEFAULT POSITION
POS(+)
52.4
52.2
Assembly
Note: Some batteries may require the use of
longer bolts to fasten both the winch wire
ends and the stock vehicle wiring. Use two
M6 x 20mm Bolts (included) if required.
NEG(-)
TO WINCH (-)
(BLUE POST)
TO BATTERY (+)
(RED POST)
LEADS ROTATED 90°
8
ASSEMBLy
POS(+)
These two posts must
be wired to the battery!
CONTACTOR
TO BATTERY (-)
(BLACK POST)
TO WINCH (+)
(YELLOW)
Note: Motor casing
rotates with End Cap