Lpd Control; Modems - HP Compaq t5520 Administrator's Manual

Control Panel

LPD Control

✎
✎

Modems

5-14
The LPD Control dialog box allows you to set the terminal up as a
line printer (print server).
To open the LPD Control dialog box, double-click the LPD Control
icon in the Control Panel.
HP Compaq t5300 thin client models do not have legacy ports.
Therefore, the LPD Control program will not appear in the Control
Panel for those systems.
To set the terminal up as a print server:
1. Select the Enable Printer check box.
2. Enter the Printer Name and Network Port.
3. Select the appropriate printer port from the drop-down list. If you
select a ComPort, you have the option of configuring the serial
port by clicking the Configure button and entering the
appropriate parameters.
4. Select the Send Form Feed check box if form feeds are
necessary. This is needed primarily for older printer technology.
You must enable the terminal's serial port in BIOS and in the Control
Panel's Port Lock utility. You must also set up the application server
for LPD printing.
The Modem Settings dialog box is used to access and modify settings
for external serial modems.
To open the Modem Settings dialog box, double-click the Modems
icon in the Control Panel
Refer to the modem device instructions for listings of modem "AT"
commands available for the modem.
www.hp.com Administrator's Guide