Snmp - HP Compaq t5520 Administrator's Manual

✎
✎

SNMP

Administrator's Guide
7. If you are not basing the Permissions on a template and want to
choose which Permissions will be assigned to the new account,
select the Permissions tab on the Add New User dialog box.
8. The Permissions tab contains check boxes for all the items
available in the Control Panel plus a check box for access rights
to Windows Explorer and a check box to give the user permission
to change the password. Select the items in the list that you want
to allow the user to access. If the user is an Administrator, select
the User is an Administrator check box to provide the user with
access to all the listed items.
9. After completing all the above steps, click the OK button on any
of the Add New User tabs. You will return to the Users tab on the
Security dialog box with the new account listed in the accounts
list.
Refer to the previous section,
for the new account.
To modify a current account, select the account from the list on the
Users tab of the Security dialog box and click the Modify button,
then make the appropriate modifications. Note that modifying the
default User or Guest accounts will also change the template
properties when using the Set from Template feature.
The terminal can be managed through standard third-party simple
network management protocol (SNMP) tools. The SNMP Network
Administration dialog box is used to enter parameters required for
SNMP management.
SNMP agents run in network elements and respond to Network
Management Station (NMS) queries (GETs). SNMP provides a
means to query all terminals assigned to a specific community. Each
community should have a unique name and all members of a
community have the same access privileges. A single terminal can be
assigned to multiple communities.
www.hp.com
"Enabling Security,"
Control Panel
to enable security
5-23