Settings For Vnc Server - HP Compaq t5520 Administrator's Manual

Administrator's Guide

Settings for VNC Server

Configure VNC Server on your thin client by checking the following
check boxes:
Check Box
Prompt local user to accept
incoming connections
Enable Viewer Cursor
Accept input events from clients
Autoport Select
Accept connections on port
Allow HTTP connections on port
Additional information about VNC Server features can be found at:
http://www.realvnc.com/documentation.html
www.hp.com
Programs and Add-ons
Explanation
The default should ENABLED and
Auto Accept should be ENABLED
This setting allows the viewer to
show its cursor on the screen while
moving the mouse. The viewer
shows a small dot that points to the
actual location of the "hot spot" of
the remote cursor location.
Enabling this setting will show the
local cursor of the viewer;
however, the remote dot will lag
behind the local viewer cursor as it
tries to synchronize the local
viewer cursor.
Enabling this setting will allow the
viewer to control the keyboard and
mouse of the unit remotely.
This setting will be deprecated,
leaving only the "Accept
connections on port" and "Allow
HTTP connections on port".
Defaults to the standard VNC port
of 5900.
Defaults to the standard VNC port
of 5800 for JVM (Java) enabled
Web Browser Viewers.
6-7