Global Ica Client Settings; Hotkeys Tab - HP Compaq t5520 Administrator's Manual

Control Panel

Global ICA Client Settings

5-8
The Global ICA Client Settings dialog box is used to configure ICA
client settings used during ICA sessions.
To open the ICA Client Settings dialog box, double-click the Global
ICA Client Settings icon in the Control Panel.
There are five tabs on the ICA Client Settings dialog box: Hotkeys,
Preferences, Server Location, and Firewall Settings.

Hotkeys Tab

The Hotkeys tab is used to configure hotkeys that can be used during
ICA sessions. Hotkeys are used to perform various functions.
You can assign the hotkeys used to perform a function by selecting
the hotkey combinations from the drop-down list next to each
function.
■
The Connection Status hotkey invokes a message about the
status of the connection.
■
The Close Session hotkey disconnects the terminal from the
server but does not actually close the session on the server. The
session will continue to run on the server until the terminal
operator logs off.
■
The Esc hotkey performs the same function as the
keyboard.
■
The CTRL-ALT-DEL hotkey invokes the terminal Security
dialog box.
■
The CTRL-ESC hotkey displays the Remote Task list on
WinFrame servers, or displays the Start menu on MetaFrame
servers.
■
The ALT-ESC hotkey cycles the focus through the minimized
icons.
■
The ALT-TAB hotkey cycles through open applications in
sequential order.
■
The ALT-BACKTAB hotkey also cycles through open
applications sequentially, but in the opposite direction.
www.hp.com
Esc
key on a
Administrator's Guide