Electromagnetic Compatibility Programs; Introduction; Federal Communications Commission (Usa); European Community - HP 743 Series Technical Reference Manual For Oems

Electromagnetic Compatibility Programs

The sections that follow discuss the Federal Communications Commission, European Com-
munity, and Voluntary Control Council for Interface standards bodies.

Introduction

Models 743, 744 and 748 comply with published standards for Electromagnetic Compatibil-
ity (EMC). In general, testing to required standards was performed using statistically signifi-
cant quantities of typical Models 743, 744 and 748 configurations representative of the
product shipped to customers. These tests' statistical basis demonstrates that with 80% confi-
dence, at least 80% of the production population meets the specified margins to each stan-
dard. Additional configurations are also tested to reduce the probability that non-conforming
configurations exist. Continued compliance is measured by periodic regulatory audits; pro-
duction units are tested for each audit. The Models 743, 744 and 748 are in compliance with
adopted EMC standards issued by the following standards bodies:

• Federal Communications Commission (USA)

• European Community

• Voluntary Control Council for Interference (Japan)

Federal Communications Commission (USA)
• Compliance Date: 6 November 1992 (dates of subsequent revisions available upon re-
quest)
• Self-Certified to 47 CFR (Code of Federal Regulations), parts 2 and 15, Class A
As evidence of compliance, products are marked with the FCC A statement.
European Community
• Compliance Date: 6 November 1992 (dates of subsequent revisions available upon re-
quest)
• Compliant to the EMC Directive 89/33/EEC and 92/31/EEC for Information Technol-
ogy Equipment (ITE) per EN55022, and for Industrial, Scientific, and Medical Equip-
ment (ISM) per EN55011
As evidence of compliance, products are marked with the CE mark, and the product manuals
include a Declaration of Conformity.
Voluntary Control Council for Interference (Japan)
• Compliance Date: 9 December, 1992. (dates of subsequent revisions available upon re-
quest)
• Registered to VCCI as a Class A product, according to CISPR 22
As evidence of compliance, products are marked with the VCCI statement.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Electromagnetic Compatibility Programs
Quality
3-3