Creating A User Account - HP Compaq t5520 Administrator's Manual

The HP Connection Administrator Advanced Window

Creating a User Account

4-16
Terminal operator user accounts are set up in the Security window.
This Users tab on the Security window lists all operator accounts and
shows which accounts are set up with Administrator security
permissions and which accounts are enabled.
There are three default accounts already set up (Administrator, Guest,
and User) that can be used as templates for new accounts. The default
Guest and User accounts can be modified as needed.
To create a new user account:
1. On the HP Connection Administrator window, click the
Advanced button.
2. On the Assign Connections tab of the Advanced window, click
the Security button.
3. On the Security window, select the Users tab and click the Add
button. The Add New User dialog box is displayed.
4. On the Global UI tab, enter a name for the new user account in
the Name field.
5. Enter a password for the new user in the Password field.
6. Enter the password again in the Confirm Password field.
7. Leave the Account is disabled check box clear unless you want to
disable the account.
8. If you want to use the same permissions assigned to an account
that was previously created, click the Set from Template button.
The Set from Template dialog box is displayed
a. Select the account type that you want to use as a template
from the drop-down list of accounts in the Based on field.
b. Click the OK button to apply the selected template and return
to the Add New User dialog box.
c. Click the OK button on the Add New User dialog box to save
the settings and return to the Users tab on the Security
window.
9. If you are not basing the permissions on a template and want to
choose which permissions will be assigned to the new account,
select the Permissions tab on the Add New User dialog box.
www.hp.com Administrator's Guide