Telephone - If Equipped - Chrysler 2006 300 Manual

156 UNDERSTANDING YOUR INSTRUMENT PANEL
To set the variance: Turn the ignition switch ON. Then,
press and hold the compass button for approximately 2
seconds. Then, press the SCROLL button until "Compass
Variance" displays in the EVIC. Both the "Compass
Variance" message and the last variance zone number
will display in the EVIC. Then, press and release FUNC-
TION SELECT button until the proper variance zone is
selected according to the map. Finally, press and release
the compass button to exit.
Telephone — If Equipped
Press and release the MENU button until "Telephone"
displays in the EVIC.
When the appropriate conditions exist the EVIC provides
the following telephone information:
• Phone status: idle, voice mail, roaming, battery strength
and signal strength in increments of 20 percent.
• Call status: Incoming call, connecting, connected, air
time in minutes and seconds, call ended, call failed,
roaming and no phone connection.
• UConnect Active.
• Caller ID phone number display.
When the appropriate conditions exist, and if supported
by the cell phone, the EVIC will display the following
telephone symbols:
The EVIC displays this symbol to indicate the
signal strength of the UConnect™ phone. The
number of horizontal bars increase as the
strength of the UConnect™ phone signal in-
Signal
creases.
Strength
The EVIC displays this symbol to indicate an
incoming call.
Incom-
ing Call
The EVIC displays this symbol to indicate that
the UConnect™ phone is currently in analog
mode.
Analog
The EVIC displays this symbol to indicate that
the UConnect™ phone is currently roaming.
Roam-
ing