Setting The Analog Clock - Chrysler 2006 300 Manual

162 UNDERSTANDING YOUR INSTRUMENT PANEL
"Headlights On With Wipers" (Available with
Auto Headlights Only)
When ON is selected, and the headlight switch is in the
AUTO position, the headlights will turn on approxi-
mately 10 seconds after the wipers are turned on. The
headlights will also turn off when the wipers are turned
off if they were turned on by this feature. To make your
selection, press and release the FUNCTION SELECT
button until "ON" or "OFF" appears.
NOTE: Turning the headlights on during the daytime
causes the instrument panel lights to dim. To increase the
brightness, refer to "Lights" in Section 3 of this manual.
"Automatic High Beams" — If Equipped
When this feature is selected, the high beam headlights
will deactivate automatically under certain conditions. To
make your selection, press and release the FUNCTION
SELECT button until "ON" or "OFF" appears. Refer to
"SmartBeams" in section 3 of this manual for more
information.

SETTING THE ANALOG CLOCK

To set the analog clock at the top center of the instrument
panel, press and hold the button until the setting is
correct.
Analog Clock