Keyless Enter-N-Go - If Equipped - Chrysler TOWN & COUNTRY 2016 User Manual

Hide thumbs Also See for TOWN & COUNTRY 2016:
Table of Contents

Advertisement

KEYLESS ENTER-N-GO — IF EQUIPPED
The Keyless Enter-N-Go system is an enhancement to the vehicle's Remote Keyless Entry (RKE)
feature. This feature allows you to lock and unlock the vehicle's door(s) and liftgate without
having to push the Key Fob LOCK or UNLOCK buttons, as well as starting and stopping the
vehicle with the push of a button.
To Unlock From The Driver or Passenger Side:
• With a valid Keyless Enter-N-Go Key Fob
located outside the vehicle and within 5 ft
(1.5 m) of the driver or passenger side door
handle, grab either front door handle to un-
lock the door automatically.
To Lock The Vehicle
• Both front door handles have buttons lo-
cated on the outside of the handle. With one
of the vehicles Keyless Enter-N-Go Key
Fobs located outside the vehicle and within
5 ft (1.5m) of the driver's or passenger front
door handle, push the door handle button to
lock all four doors and liftgate.
• DO NOT grab the door handle, when pushing the door handle button. This could unlock the
door(s).
Push The Door Handle Button To Lock
NOTE:
• If "Unlock All Doors 1st Press" is programmed, all doors will unlock when you grab hold of the
front driver's door handle. To select between "Unlock Driver Door 1st Press" and "Unlock All
Doors 1st Press," refer to the "Electronic Vehicle Information Center (EVIC)" in your vehicles
Owner's Manual on the DVD or "Programmable Features" in this guide for further information.
G E T T I N G S T A R T E D
Grab The Door Handle To Unlock
Do Not Grab The Door Handle
11

Advertisement

Table of Contents
loading

Table of Contents