Wheel Cover Installation (If Required); Jump-Starting Procedures If Battery Is Low - Chrysler 2006 300 Manual

Chrysler new vehicle instrution manual
Hide thumbs Also See for 2006 300:
Table of Contents

Advertisement

282 WHAT TO DO IN EMERGENCIES

Wheel Cover Installation (If Required)

1. Tighten the two lug nuts on the mounting studs on
each side of the stud which is in alignment with the valve
stem.
2. Align the valve notch in the wheel cover with the
valve stem on the wheel.
3. Install the cover by hand, snapping the cover over the
two lug nuts. Do not use a hammer or excessive force to
install the cover.
4. Return to Changing a Tire Section, Item #9 above.
JUMP-STARTING PROCEDURES IF BATTERY IS
LOW
WARNING!
Take care to avoid the radiator cooling fan whenever
the hood is raised. It can start anytime the ignition
switch is on. You can be hurt by the fan.

Advertisement

Table of Contents
loading

Table of Contents