Pc Health Status Option - ECS K7VTA2 User Manual

expansion card. Use the second item Reserved Memory Length to set the
amount of reserved memory. Press <Esc> to close the Memory Resources
sub-menu.
PCI/VGA Palette Snoop (Disabled)
This item is designed to overcome some problems that can be caused by
some non-standard VGA cards. This board includes a built-in VGA system
that does not require palette snooping so you must leave this item disabled.
Assign IRQ for VGA/USB (Enabled)
Names the interrupt request (IRQ) line assigned to the USB/VGA (if any) on
your system. Activity of the selected IRQ always awakens the system.
INT Pin1~4 Assignment (Auto)
Names the interrupt request (IRQ) line assigned to a device connected to the
PCI interface on your system.

PC Health Status Option

On mainboards that support hardware monitoring, this item lets you monitor
the parameters for critical voltages, critical temperatures, and fan speeds. You
cannot make any changes to these fields. They are display only:
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Shutdown Temperature
Vcore
+ 2.5V
+ 3.3V
+ 5V
+ 12V
3.3V Battery
System Temperature
CPU Temperature
CPU FAN speed
System Fan Speed
↑ ↓ → ← : MoveEnter : Select
F5:Previous Values
Shutdown Temperature
Enables you to set the maximum temperature the system can reach before
powering down.
System Component Characteristics
These fields provide you with information about the systems current operating
status. You cannot make changes to these fields.
PC Health Status
[Disabled ]
+/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F6:Fail-Safe Defaults F7:Optimized Defaults
44
Item Help
Menu Level