Pc Health Status - ECS L4IGEA2 Manual

Interrupt Request Line is reserved for a legacy ISA expansion card. Press
<Esc> to close the IRQ Resources submenu.
In the Memory Resources submenu, use the first item R eserved Memory
Base to set the start address of the memory you want to reserve for the ISA
expansion card. Use the second item Reserved Memory Length to set the
amount of reserved memory. Press <Esc> to close the Memory Resources
submenu.
PCI/VGA Palette Snoop (Disabled)
This item is designed to overcome problems that can be caused by some non-
standard VGA cards. This board includes a built-in VGA system that does not
require palette snooping so you must leave this item disabled.
Assign IRQ For USB (Enabled)
Names the interrupt request (IRQ) line assigned to the USB on your system.
Activity of the selected IRQ always awakens the system.
INT Pin1~8 Assignment (Auto)
Names the interrupt request (IRQ) line assigned to a device connected to the
PCI interface on your system.

PC Health Status

On mainboards that support hardware monitoring, this item lets you monitor
the parameters for critical voltages, critical temperatures, and fan speeds.
Phoenix – AwardBIOS CMOS Setup Utility
Shutdown Temperature
CPU Warning Temperature
Chassis Open Warning
Chassis has been
Current System Tem p
Current CPU Temp
SYS FAN Speed
CPU FAN Speed
PWR FAN Speed
CPU Vcore
1.50 V
3.30 V
5.00 V
12.0 V
Battery Voltage
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
Shutdown Temperature
Enables you to set the maximum temperature the system can reach before
PC Health Status
[Disabled ]
[Disabled]
[Disabled]
+/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F6:Fail-Safe Defaults F7:Optimized Defaults
39
Item Help
Menu Level