Table of Contents
Advertisement
In the Memory Resources submenu, use the first item R eserved Memory
Base to set the start address of the memory you want to reserve for the ISA
expansion card. Use the second item Reserved Memory Length to set the
amount of reserved memory. Press <Esc> to close the Memory Resources
submenu.
PCI/VGA Palette Snoop (Disabled)
This item is designed to overcome problems that can be caused by some non-
standard VGA cards. This board includes a built-in VGA system that does not
require palette snooping so you must leave this item disabled.
Assign IRQ For USB (Enabled)
Names the interrupt request (IRQ) line assigned to the USB on your system.
Activity of the selected IRQ always awakens the system.
INT Pin1~8 Assignment (Auto)
Names the interrupt request (IRQ) line assigned to a device connected to the
PCI interface on your system.
PC Health Status Option
On mainboards that support hardware monitoring, this item lets you monitor
the parameters for critical voltages, critical temperatures, and fan speeds.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Shutdown Temperature
CPU Warning Temperature
CPU Vcore
1.80 V
3.30 V
5.00 V
12.0 V
2.5 V
Voltage Battery
Current System Temp
Current CPU Temp
CPU FAN Speed
Chassis FAN Speed
Power FAN Speed
↑ ↓ → ← : MoveEnter : Select
F5:Previous Values
Shutdown Temperature
Enables you to set the maximum temperature the system can reach before
powering down.
CPU Warning Temperature
Use this item to set the warning temperature level for the processor.
PC Health Status
[70°C/140°F]
[80°C/176°F]
+/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F6:Fail-Safe Defaults
F7:Optimized Defaults
41
Item Help
Menu Level
Advertisement
Table of Contents
