Olivetti d-Color MF220 Copy Operations page 252

10
8
Register finger vein patterns.
% Scan the finger vein patterns three times; reset the same finger and then press [Start Reading] for
each scanning.
% After scanning the finger vein patterns, place the same finger, and click [Authentication Test].
% If the authentication test has succeeded, press [Register].
% If the authentication test has failed, place your finger on the authentication unit again, and click [Au-
thentication Test].
% If the authentication has failed, click [Reset] to repeat the scanning process.
Authentication Unit (biometric type) AU-101
Authentication Unit (biometric type) AU-102
9
Click [Registration].
10-16
Using an authentication unit (biometric type)
d-Color MF360/280/220 (Version 3)
10.1