Olivetti d-Color MF220 Copy Operations page 147

6.9 [Register Authentication Information]
3
Register authentication information.
For biometric authentication, place your finger on the authentication unit to scan the finger vein pattern.
% Scan the finger vein pattern three times; reset the same finger each time and then press [Scan] for
each scanning.
% After scanning the finger vein patterns, place the same finger on the authentication unit, and press
[Authentication Test].
% If your finger vein patterns have been authenticated in the authentication test, press [New]. If au-
thentication has failed, retry scanning the finger.
For IC card authentication, place your IC card on the authentication unit, and press [OK].
4
Press [Close].
d-Color MF360/280/220 (Version 3)
6
6-17