Supplied Components; System Requirements - Sharp 60005523 Operation Manual

Table of Contents

Advertisement

If any components are missing, please contact your dealer.
 Liquid Crystal Display Monitor: 1
 Power cord
 HDMI cable: 1
 USB Type C cable (26.2 feet [8 m]): 1
 USB Type C extend cable: 1
 CD-ROM (Utility Disk): 1
 Setup Manual: 1
 Touch pen: 1
* The remote control unit is supplied with the PN-ZR02 (optional).
(Remote control sensor box is not used.)
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
About USB Type C extend cable
• Connect the USB Type C extend cable (supplied) between the USB Type C cable (supplied) and the external device.
When connecting/disconnecting to the external device, plug/unplug the USB Type C extend cable to prevent damage to the
USB Type C cable.
Caution
• The USB Type C cable may also provide power to the connected computer.
Contact your local electrical contractor before running the supplied cable under carpets, behind walls or over ceiling tiles, as
regulations may vary.
TIPS
• When the Information Display Downloader is installed, you can check and download the most recent versions of the software
programs.
Hardware
Operating system
The USB port varies depending on the terminal connected to the computer.
USB Type C 1 input terminal
USB Type C 2 input terminal
HDMI input terminal

Supplied Components

 USB A to B cable (for touch back): 1
 Cable clamp: 1
 Camera: 1
 Knurled screw (M3): 2
 USB A to B cable (for camera): 1
 S/PDIF cable: 1
 3.5 mm mini jack to USB A cable: 1

System Requirements

Must have a USB 2.0 compliant port.
Windows 8.1 (32-bit or 64-bit version), Windows 10 (32-bit or 64-bit version)
(Windows 10 recommended.)
macOS v10.12, v10.13
Google Chrome OS Version 75 or later
 IoT sensor hub: 1
 Micro USB cable (for IoT sensor hub): 1
 Knurled screw (M3): 2
 IoT sensor hub screw (M3): 2
 IoT sensor hub mounting brackets (L/R):
x1 each
USB Type C 1 input terminal
USB Type C 2 input terminal
USB Type B input terminal for touch back
9
E

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pn-cd701

Table of Contents