Download Print this page
Sharp PN-CD701 Supplemental Information

Sharp PN-CD701 Supplemental Information

Interactive collaboration display
Hide thumbs Also See for PN-CD701:

Advertisement

Quick Links

Supplemental information for PN-CD701
Ver.1.1
SHARP corporation
5, Dec., 2019

Advertisement

loading

Summary of Contents for Sharp PN-CD701

  • Page 1 Supplemental information for PN-CD701 Ver.1.1 SHARP corporation 5, Dec., 2019...
  • Page 2 6-1. Procedure to enable LAN1 Network 3. Outline of USB type-C 6-2. LAN 1 network always on 4. Conditions of network connections to the PN-CD701 6-3. Matrix of LAN1 Network status 4-1. Common functions of both LAN ports 7. How to install / use Android apps on 7-1.
  • Page 3: System Requirement

    1. System requirement < >...
  • Page 4 2. Condition of connecting Mac / Chrome OS PN-CD701 is designed for using with Windows devices. It supports both Mac OS and Chromebook but there are some limitations. Mac OS Chromebook * It is common for both Mac OS and Chrome book...
  • Page 5 Mic (Audio-in) LAN connection becomes enabled when you Video-out connect your PC by USB type-C. Audio-out But in case of PN-CD701, it is necessary to do Network (LAN) USB type A Touch signal some additional procedures to enable LAN function.
  • Page 6 • If a cable is damaged, never use the cable. • If you connect this cable to PN-CD701, please fix the cable with a clamp. • This cable has a “SOURCE” connector and a “DISPLAY” connector. Be careful not to mistake the orientation.
  • Page 7 ◆ About “Multi board” You can display video on a second device using USB-C Out. The USB-C cable enables touch without connecting a touch cable. USB-C cable unit of PN-CD701 HDMI cable Touch cable (USB-B cable) If you want to touch on the second display, please connect as follows.
  • Page 8 USB type-C or USB-B port. (Please confirm this method of network access is acceptable with the network IT administrator). LAN 2 : LAN port for output data & control of PN-CD701 The port is mandatory for using SWS (Synappx WorkSpaces Collected data by IoT sensors are uploaded to internet via this LAN port.
  • Page 9 4. Conditions of network connections to the PN-CD701 4-2. Use case User who has a compatible USB type-C Fig.2: LAN connection diagram connection on their PC will also get a LAN connection via the USB type-C cable from IoT sensor PN-CD701.
  • Page 10 • There are no network management devices (routers or switches) inside. • Works with different LAN settings. “LAN 1” is completely isolated from the internal controller of PN-CD701 So there is no security breach concerns from connected PC devices. Set with...
  • Page 11 4-3. Technical background 4-3-2. Network requirements for SWS (IoT sensor data) Tips: Required network connection for IoT sensors is always LAN 2 Internet connections Internet connections are available using intranet. If network devices filter IoT packets, they can accessed though router, proxy, GW/FW. Condition of IP address It can use DHCP.
  • Page 12 5. Notes on updating firmware 5-1. OOBE Out-Of-Box-Experience(OOBE) is displayed at the first startup or after resetting. Since there is a setting to search for the latest firmware in the OOBE setting, Please prepare the Internet environment and execute the update. Figure.
  • Page 13 *1 If the FW update is performed in this way, the setting value will be cleared, so reconfiguration is required. *2 If you do not have the tool, please contact an authorized SHARP servicing dealer or service center. *3 Do not let go of the buttons until the “Egg” picture appears on the screen.
  • Page 14 This method requires a network environment. If you want to update the FW while keeping the display settings, you can use OTA update. 1.Please open the setting menu of PN-CD701 and press the Admin menu. 2. Click Update in OTA Firmware Updates.
  • Page 15 6. Enable LAN 1 Network 6-1. Procedure to enable LAN1 Network Access “System” menu Switch “LAN1 Network” to “on” Enter user or admin passcode LAN1 Network becomes available 6-2. LAN 1 network always on If you want to enable LAN1 function permanently, it can be set via “Admin” menu. Switch “LAN1 Network Always-on”...
  • Page 16 6. Enable LAN 1 Network 6-3. Matrix of LAN1 Network status LAN 1 Network will be back to “disable” after disconnect PC devices because of security issue. (Except when you choose “LAN 1 Network Always-on”.) E : LAN1 network connection is enable Matrix of LAN1 Network status D : LAN1 network connection is disable Setting...
  • Page 17 * “Sideloading” is a method to install some Android apps without using “Google Play Store”. PN-CD701 has been Android CTS (Compatibility Test Suite) certified, so it can be described as “Android inside” and the user/SI can install additional Android apps.
  • Page 18 7. How to install / use Android apps on PN-CD701 7-2. How to display newly installed apps. Please follow the steps below. 1.Taps...
  • Page 19 8. Notes on camera attached to PN-CD701 The camera attached to PN-CD701 supports 4K resolution, but camera video output is Full HD because the cable included with PN-CD701 is a USB2.0 cable. (Because the best possible picture quality with the main application “Teams” and “Skype for Business” is with Full HD.) If you want to show 4K image with different applications, please prepare the following connection environment.
  • Page 20 4. About data acquired by IoT sensor Values ​ ​ s uch as temperature, humidity, and illuminance acquired by the IoT sensor are measured values ​ ​ n ear the PN-CD701, not average values ​ ​ i n the room being used.
  • Page 21 10. Detail of setting menu items...
  • Page 22 10. Detail of setting menu items...
  • Page 23 10. Detail of setting menu items...