Ir Ð Ir Connector; Keylock & Power Led Connector; Spk Ð Speaker Connector; Rst Ð Hardware Reset Control - SOYO 6KM Series User's Manual & Technical Reference

8
Hardware Setup
IR – IR Connector
A five-pin wafer connector is for connecting to the IR device. Use the
device that has the IrDA or ASKIR specification and choose
IrDA/ASKIR from the BIOS setup.
IR Connector
Pin Assignment
Keylock & Power LED Connector
This connector is for a lock that may be installed on the system case for
enabling or disabling the keyboard. This connector also attaches to the
caseÕs Power LED. (Pin 1, 3 for power LED, pin 4, 5 for keylock.)
SPK – Speaker Connector
Attach the system speaker to connector SPK.
RST – Hardware Reset Control
Attach the Reset switch to RST. Closing the Reset switch restarts the
system.
IDE1/IDE2 – On-board Primary/Secondary IDE HDD

Connectors

Attach on-board hard disk drives to these connectors.

COM1/COM2 Connectors

Connect COM1/COM2 devices to these connectors.