SOYO 6KM Series User's Manual & Technical Reference page 39

BIOS Setup
IDE Primary Master
UDMA/
IDE Primary Slave
UDMA/
IDE Secondary Master
UDMA/
IDE Secondary Slave
UDMA
On-chip Primary PCI
IDE/
On-chip Secondary PCI
IDE
USB Keyboard Support
POWER On Function
Setting
BUTTON ONLY
(default)
Password
Hot Key
Note: Please set JP10 to 2Ð3 if you choose ÒBUTTON ONLY.Ó
KB POWER On Password If you selected password from the item
Choose Auto (default) or Disabled.
Auto Ð Supports Ultra DMA mode.
Enabled ÐUse the on-board IDE
(default)
Disabled Ð Turn off the on-board IDE
Choose Disabled (default) or Enabled.
You need to use the regular keyboard to
get in the BIOS Setup to enable this
function before using the USB keyboard.
If you enable the PS/2 keyboard wake up
function by setting JP10 to 1Ð2, you can
set the appropriate action through this
item. Refer to the table below for
details:
This setting disables the wake-up
function.
If you choose this option, you will
have to set your password in the ÒKB
Power On PasswordÓ item below.
You will be able to wake up the
system by entering the password or by
pressing the power button.
If you choose this option, you will
have to set the key combination that
will wake up the system in the ÒHot
key Power OnÓ item below.
above, you can set your password
through this item.
Explanation
35