Integrated Peripherals - SOYO 6KM Series User's Manual & Technical Reference

34

Integrated Peripherals

The Integrated Peripherals option changes the values of the chipset
registers. These registers control system options in the computer.
Note: Change these settings only if you are familiar with the Chipset.
Run the Integrated Peripherals as follows.
1. Choose ÒIntegrated PeripheralsÓ from the Main Menu and the
following screen appears.
settings:)
IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO : Auto
IDE Secondary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
IDE Secondary Master UDMA: Auto
IDE Secondary Slave UDMA : Auto
OnChip Primary PCI IDE : Enabled
OnChip Secondary PCI IDE : Enabled
USB Keyboard Support
Power ON Function
Onboard FDC Controller
2. Use the arrow keys to move between items and select values.
Modify selected fields using the PgUp/PgDn/+/Ð keys.
A short description of screen items follows:
IDE HDD Block Mode
IDE Primary Master PIO/
IDE Primary Slave PIO/
IDE Secondary Master
PIO/
IDE Secondary Slave PIO
(The screen below shows default
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
Onboard Serial Port 1
: Enabled
Onboard Serial Port 2
: Auto
UART Mode Select
: Auto
: Auto
Onboard Parallel Port
: Auto
Parallel Port Mode
: Auto
: Disabled
: BUTTON ONLY
ESC : Quit
F1
F5
: Enabled
F6
F7
Choose Enabled (default) or Disabled.
Enabled invokes multi-sector transfer
instead of one sector per transfer. Not all
HDDs support this function.
Choose Auto (default) or mode 0~4.
Mode 0 is the slowest speed, and HDD
mode 4 is the fastest speed. For better
performance and stability, we suggest
you use the Auto setting to set the HDD
control timing.
↑ ↓ → ←: Select Item
: Help PU/PD/+/– : Modify
: Old Values (Shift)F2 : Color
: Load BIOS Defaults
: Load Setup Defaults
BIOS Setup
: 3F8/IRQ4
: 2F8/IRQ3
: Normal
: 378/IRQ7
: SPP