Door Open Alarm Setting; Door Setting - IDTECK iTDC User Manual

overwrite into the event buffers. If you use iTDC for standalone (just for door access) then
select NOT USE.
Choosing "NOT USE" will allow resetting ID/EVENT COUNT
to delete saved EVENT Memory.
2.7

DOOR OPEN ALARM SETTING

When the door is still opened after the door unlock time, you may set this alarm function. To
use this function, you have to install Door Contact Sensor on the door and set-up the output
of Door Contact Sensor from the iTDC Application Software. '03' is default.
00
Alarm if the door is opened after the door unlock time
01~98
Alarm if the door is opened after the set time (01~98s)
99
No alarm
2.8

DOOR SETTING

Set-up how many doors to be controlled by the iTDC.
p.84
iTDC
SETTING CHANGES