System - AVer MD330U Series User Manual

System

You can view the system information, or configure some system settings on this page.
 Camera Information: Displays the system information.
 Upgrade firmware: Follow below steps to upgrade the firmware.
1. Download the newest firmware from
2. On the Web page, go to System > Upgrade firmware.
3. Click Browse to select the firmware.
4. Click Upgrade to start upgrading the firmware.
5. Refresh the browser after the upgrade process is complete.
 Reset: Click Reset To Factory Default to clear all values and reset the camera back to factory
default values.
 Login: The default login ID and password are admin/admin. To change the login ID and password,
input the new login ID and password and then click Change.
 Language: Change the Web UI language.
 Status OSD: Enable/disable Preset status to be displayed on the live screen. When operating the
Preset (Save Preset, Call Preset, Cancel Preset) functions, the status will be displayed on the live
screen.
 Power Up to Preset: If this function is enabled, after camera power-up, the camera will move to
the input preset position. To set up this function, toggle the button on, input a preset position and
then click Save. Ensure the preset positions have been pre-configured before enabling this
function.
https://www.aver.com/download-center/
23
.