Hitachi PSC-A32MN Installation And Operation Manual page 52

Operation
5.3.3 Scheduled settings
This function is used for timer operation.
It is possible to set a schedule for a block and for each group.
A holiday setting independent of the schedule is also available.
5.3.3.1 Schedule timer settings
Timer setting for weekly schedule
1 Select "Schedule Settings" at the "Menu" screen.
2 Select "Schedule Timer Setting" at the "Schedule Settings" screen.
(1)
3 Select the target (all groups, block or group).
The buttons of the groups with schedule setup are shown in blue.
The buttons of the groups with no schedule setup are shown in grey.
4 Select the target day of the week (from Monday to Sunday).
5 Select the schedule item number (from 1 to 10).
(3) Block
(3) (3) All Groups
Group
6 Set the schedule time, run/stop operation and temperature parameters.
Select the schedule item No. (1~10) and set the time.
Select "ON" , "OFF" or "Unspe".
Set the temperature by tapping " " or " ".
"- -" is shown in case that there are no settings for the change of a particular parameter, such as operation mode or temperature.
44 PMML0332A rev.0 - 05/2015
(2)
(4)