Canon FAXPHONE L80 Basic Manual page 49

14
Press Set twice.
15 Use ∂ or ¨ to select the transmission
type setting you want.
• You can select from the following:
– REGULAR TX
Normal transmission.
– PSWD/SUBADDRESS
Transmission with a subaddress
and/or password. For details, see
below.
If you selected REGULAR TX in step 15:
16
Press Set.
17
Press Stop/Reset to return to standby
mode.
If you selected PSWD/SUBADDRESS in step 15:
The other party's fax machine may require an ITU-T-standard subaddress and/or
password to receive faxes. The subaddress/password you register here must match
exactly the one(s) registered on the other party's fax machine. Contact the other party
to check their settings.
When sending with a subaddress/password, the other party's fax machine receives the
fax only if your subaddress/password matches theirs. Their fax machine then handles
the received fax according to the feature they are using.
You also need to register a subaddress/password when polling a fax machine that
requires these settings (1 User's Guide).
Continue with the steps below to register a subaddress/password:
16
Press Set twice.
17
If a subaddress is required, use the
numeric buttons to enter it (max. 20
digits).
• If a subaddress is not required, ignore
this step.
• If you have already registered a
subaddress that you want to keep,
ignore this step.
Chapter 4
TX TYPE
REGULAR TX
05=
12/26 FaxTel
SUBADDRESS
1234
Sending Faxes
4-9