Advertisement
4. Remove the cover and the Mini-Disk filter. Attach
the outlet side (see Figure 4). If using
" converter barb onto the
a
⁄
1
4
then insert the converter barb into the outlet side of the TOP.
Figure 4
5. Use the rubber caps provided to close all unused
outlets. Do this by removing the cover and the
Mini-Disk filter. Press the rubber caps into the
unused outlets. Re-install the Mini-Disk filter
and cover. Tighten cover by hand.
6. Secure micro tubing near plants. If using more
than one outlet per plant, space each outlet
a minimum of 6-8" apart. Attach the plastic
stake to end of the micro tubing and add a bug plug at the end of micro tubing. A bug
plug prevents insects from crawling into the tubing, which they sometimes do to lay their
eggs. The bug plug will still allow water to trickle out for the plants.
NOTE: Bug plugs may be used only with
Figure 7
7. Backfill all trenches.
Figure 9
" micro tubing, first connect
⁄
1
4
" micro tubing (see Figure 5) and
⁄
1
4
Figure 5
" micro tubing. (see Figure 7)
⁄
1
8
3
"micro tubing to
⁄
1
8
Figure 6
Figure 8
Figure 10
Advertisement
