Advertisement
1. TOP 12 OUTLET DRIP MANIFOLD
DIG TOP 12 outlet drip irrigation manifolds are designed to be adapted to any
or below ground. They may be incorporated into a new system, or used to convert existing
sprinkler risers into 12-Outlet drip systems. Avail able with our extremely accurate pressure
compensating emitters in four flow rates: .6, 1, 2.2 or 3.3 GPH per outlet.
TOP-005, TOP-010, TOP-020 and TOP-030 each contain a complete 12 outlet drip manifold
with 8 caps.
The TOP-100 1 GPH per outlet kit, TOP-200 2 GPH per outlet kit and TOP-300 3 GPH per
outlet kit contain 1 complete 12 outlet drip manifold, 100'
tion tubing, 12 bug plugs for
converter barbs to adapt to
TOP manifolds may be used with either DIG
distribution tubing.
2. HOW TO INSTALL
1. If converting an existing sprinkler system to
a TOP manifold, first remove the sprinkler.
Then turn on the water to flush the line.
2. After the line has been flushed, thread the
TOP onto the riser.
3. Excavate a narrow path to a depth of 4"
from each individual plant to the TOP and
lay out micro tubing within the trenches or
leave micro tubing above ground and cover
with mulch.
" distribution tubing, 12 stakes, and 12 color coordinated
⁄
1
8
" distribution tubing if desired.
⁄
1
4
2
" .118 ID x .187 OD distribu-
⁄
1
8
" .118 ID or DIG
⁄
1
8
Figure 1
Figure 2
Figure 3
" riser, above
⁄
1
2
" .156 ID
⁄
1
4
Advertisement
