Advertisement
8. Pressurize the system and verify that the TOP manifold is properly functioning and if
needed, make any necessary corrections.
When designing a system, we recommend that the maximum length of micro tubing from
each outlet should not exceed 8-10'. Longer lengths may certainly be achieved, but please
consider the factor of maintenance and aesthetics.
3. 12-OUTLET ACCESSORIES
The standard micro tubing to be used with the TOP is
of .118 ID x .187 OD. With the addition of a
tubing can be used.
Model # 12-006
⁄
1
8
12-042
⁄
1
8
12-013
⁄
1
4
12-005
⁄
1
4
Additional tubing lengths available.
BUG PLUG
Tubing bug cap should be inserted at the end of each
tubing outlet, if used with any "V" stake, permitting free flow of water with mini-
mum restriction from the outlet and securing against bugs and dirt from restricting
the flow and contaminating the outlet port.
Model # 10-016 12 bug plugs for
⁄
" BARB OR ELBOW CONVERTER
1
4
" converter barb or elbow is only necessary if
⁄
1
4
a compression side to be inserted into the drip manifold body. The other side is a
" micro tubing. Converter barbs are color coded to signify which emitter is installed.
⁄
1
4
Model # 10-012 Red converter barb to be used with
10-013 Green converter barb to be used with
10-014 Purple converter barb to be used with
10-017 Black converter barb to be used with
25-007 Black converter elbow to be used with
4. CONNECTING MICRO SPRINKLERS
The TOP manifold can be used with micro sprinklers by following these steps:
1. Remove cover and the disc filter
2. Remove emitter from the outlet to be used with the micro sprinkler by using a small
screwdriver
3. Convert the outlet using a
" micro tubing to the converter barb
4. Attach a
⁄
1
4
5. Connect 1-2 micro sprinklers per outlet
Make sure not to exceed 25 GPH and 25' of
" 100' micro tubing .118 ID x .187 OD black vinyl
" 500' micro tubing .118 ID x .187 OD black vinyl
" 100' micro tubing .156 ID x .245 OD black vinyl
" 500' micro tubing .156 ID x .245 OD black vinyl
" micro tubing
⁄
1
8
" converter barb
⁄
1
4
" flexible vinyl with a wall thickness
⁄
1
8
" converter barb or elbow, vinyl
⁄
1
4
" vinyl distribution
⁄
1
8
" micro tubing is used. The converter has
⁄
1
4
" micro tubing
⁄
1
4
" micro tubing
⁄
1
4
" micro tubing
⁄
1
4
" micro tubing
⁄
1
4
" micro tubing
⁄
1
4
" micro tubing per outlet.
⁄
1
4
4
" micro
⁄
1
4
" barb to
⁄
1
4
Advertisement
