1. Manuals
  2. Brands
  3. Hanwha Techwin Manuals
  4. Network Hardware
  5. Wisenet PRN-6400DB4
  6. User manual

Hanwha Techwin Wisenet PRN-6400DB4 User Manual

Hide thumbs Also See for Wisenet PRN-6400DB4:
Table of Contents

Advertisement

Quick Links

Download this manual
NETWORK VIDEO RECORDER
User Manual
Wisenet NVR

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Wisenet PRN-6400DB4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Hanwha Techwin Wisenet PRN-6400DB4

Summary of Contents for Hanwha Techwin Wisenet PRN-6400DB4

  • Page 1 NETWORK VIDEO RECORDER User Manual Wisenet NVR...
  • Page 2 ❖ Design and specifications are subject to change without prior notice. You can download the latest version from the Hanwha Techwin web site. (www.hanwha-security.com) ❖ The initial administrator ID is “admin” and the password should be set when logging in for the first time.

  • Page 3: Overview

    Monitor real time events that occur in Recorder, sensors, and cameras or search through logs Before using this product, check if the latest version of this software is installed. Go to Hanwha Techwin's website (http:// www.hanwha-security.com) to check the software version and download necessary files.
  • Page 4 overview CAuTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ● ACCORDING TO THE INSTRUCTIONS. Do not ingest battery, Chemical Burn Hazard. ● This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause ●...

  • Page 5: Table Of Contents

    CONTENTS OVERVIEW Important Safety Instructions Real-Time Event Monitoring Product User Manual Description Check Event List Target Audience Event Search How to Use the Product Event Instant Viewer Contents Stop Alarm Output Camera Video Control Manual trigger gETTINg STARTED Starting the system Capture installation Wizard Instant Viewer...
  • Page 6 overview AI SEARCH Screen Layout of the AI Search Setting the Network IP & Port Person Search Face Search DDNS Vehicle Search IP Filtering LP Search HTTPS LPR SEARCH 802.1x E-mail PlAy Screen Layout of the Play SNMP Play Search Results DHCP Server Time Line Adjustment Open Time Line Channel...
  • Page 7 Changing the Pattern of Split Screen SEARCH VIEWER Screen Layout of the Search Viewer Changing Overall Channel Aspect Ratio Time Search Full Screen Mode Event search Setting up the Live Layout Text Search Check Layout List Bookmark Search Add Layout and Set Name Search Results Export Change of Layout Channel and Name Delete Layout...
  • Page 8 overview SETuP VIEWER ExPORT VIEWER 105 Screen Layout of the Setup Viewer 120 SEC Backup Viewer 120 Recommended System Requirements 105 Setting the Camera 105 Channel setup 120 Screen Layout of the Backup Viewer 105 Camera setup 106 Profile Setup 107 Camera Password APPENDIx 122 Use Joystick...

  • Page 9: Getting Started

    getting started Starting the SyStem inStallation Wizard As shown below, proceed through each step of the <installation wizard>. 1. Connect the power cable of the recorder to the wall outlet. Install Wizard can only be accessed at factory reset. If you do not want to proceed, click <exit>. 2.
  • Page 10 getting started Setting up the network 3. Set the administrator password on the <recorder id/PW> screen and click the <next>. Each product supports a different number of network ports. If it supports two or more network ports, you can set Click <...
  • Page 11 5. Set the date, time, and daylight saving time on the <date & time> screen, and then click the <next>. 7. On the <Camera register> screen, select a camera to register from the searched camera list and click <register>. Select a camera to register from the list and click <Change iP>. After completing camera register click <next>.

  • Page 12: Shutting Down The System

    getting started ShUtting doWn the SyStem login To use the Recorder menu, you are required to login as a user that is authorized to access the applicable menu. 1. Select <Shutdown> at the top right of the screen. 1. Select <login> at the top right of the screen. 2.

  • Page 13: Screen Layout Of The Live

    live Shows the video of the camera connected to the recorder. Also, you can adjust the camera and check the network Item Description transfer status. Saves the recorded video of the selected channel in the designated path. SCreen layoUt oF the live Clears the alarm in the event list and stops the alarm at the notification display of the system status.

  • Page 14: Checking The System Status

    live Checking the System Status Item Description The icon at the top of the screen indicates the status of the system. Displayed if the server has firmware to update. It is displayed when the system is overloaded. ￭ Limit the number of users remotely monitored by Web Viewer or VMS, or control the number of events displayed in the event list of the recorder.

  • Page 15: Check Camera List

    Check Camera list Check multichannel Cameras list For multichannel cameras registered with the Wisenet protocol, the channel information will be displayed under Displays the camera type, status, and name registered in the recorder. the model name of the multichannel camera. Registered channel (recording channel) Unregistered channel...

  • Page 16: Live Screen Menu

    live live Screen menu icons on the live Screen After selecting the desired channel on the split mode, roll the mouse cursor over the screen to see the live screen You can check the status or operation with the icons on the live screen. menu.

  • Page 17: Osd Information Display

    oSd information display Item Description You can show or hide the recording status, camera status, event display, etc. in the video window. Events from the recorder and camera are displayed in icons. Event Display To show or hide the OSD information, click < >...

  • Page 18: Channel Information Display

    live Channel information display Check the Camera Status You can check the information of the video being recorded with each camera. You can check the status of all cameras connected to the recorder. To check the channel information, click < >...
  • Page 19 record Status network Status If you select <record> in the <Status> menu, you can check the profile, record type, frame rate (Input/Record), Select <network> in the <Status> menu to check the status of network bandwidth currently being received/ and bit rate (Limit/Input/Record) for each channel. transmitted.

  • Page 20: Channel Setting

    CH10 CH11 CH12 live CH13 CH14 CH15 CH16 Changing overall Channel aspect ratio ● Enable: Turns on/off the power supply to the camera. – Checked ( ): Power supply available CH19 CH19 Video screen ratio for all channels can be changed in live split screen mode. CH10 CH11 CH12...

  • Page 21: Full Screen Mode

    Full Screen mode Setting UP the live layoUt You can change to full screen mode, which has no top/bottom/left/right areas of the live screen. This section outlines how to select a series of channels based on their purpose/accessibility and monitor them in a single layout.

  • Page 22: Add Layout And Set Name

    live add layout and Set name dynamic layout You can set the size and position of the video assigned to the layout as desired. 1. Click < > to add a layout. ￭ 2. Click < > to set the name for the added layout. The dynamic layout function can only be set on the primary monitor.
  • Page 23 zooming in and out of videos moving videos You can enlarge or reduce the video by dragging a corner or vertex of the video in the desired direction. To move the video, click the video and then drag and drop it in the desired location. If you double-click the corner or vertex of the enlarged video area, the video will be reduced step by step.

  • Page 24: Play Layout Sequence

    live Play layout Sequence real-time event monitoring You can automatically switch the layout list to a set time interval to view. Real-time events that occurred on the camera can be checked in the live video window and event list. ￭ AI events are only available for products that support AI.

  • Page 25: Event Search

    event Search event instant viewer You can browse events by camera and event type. Select an event to check from the event list, and click < > to play the recorded video at the time the event occurred. To search for a specific event, click < >...

  • Page 26: Camera Video Control

    live Camera video Control Capture You can take a screenshot of the current video of a specific channel selected on the live screen. By using the function icon of the video window, you can easily use the functions of capture, video zoom, PTZ camera and thermal imaging camera.

  • Page 27: Temperature Detection Mode

    temperature detection mode Ptz mode For images that support the thermal imaging camera function, you can click the desired point to check the You can run PTZ control of the selected channel. temperature information. Select the desired channel and click < >.

  • Page 28: Zoom In

    live zoom in display text You can zoom in or out the video via digital zoom. You can monitor texts regarding the sales record received from POS in real time. ￭ Select the desired channel and click < >. This is executable when a text device is connected. ￭...

  • Page 29: Change Channel Aspect Ratio

    Change Channel aspect ratio dewarping You can change the aspect ratio of each channel. You can correct distorted images from the fisheye camera by running dewarping. Select the desired channel and click < >. Select the channel you want and click < >.

  • Page 30: Ptz Control

    PTZ driver (physical device). ￭ It only supports a network camera with Hanwha Techwin's PTZ function and a camera registered in the ONVIF. Group The group function enables you to group various presets before calling them in sequence.

  • Page 31: Using Digital Ptz (D-Ptz) Function

    Using digital Ptz (d-Ptz) Function to delete a registered preset 1. Click < >. 1. Register a camera that supports the D-PTZ profile. ￭ 2. Click < >. <delete preset> window will appear. In cameras that support the D-PTZ profile, you can use the D-PTZ function. 2.

  • Page 32: Exporting The Recorded Video

    live exPorting the reCorded video 3. After completing the export setup, select <Start>. ￭ If there is no device to export, the <Start> button will be deactivated. You can search the storage device to be exported and export the recorded video of the desired time by layout or ￭...

  • Page 33: Screen Layout Of The Search

    search time Search You can search recorded video by various conditions such as time, event, and export. You can search the recorded data by the desired date and time conditions. Screen Layout of the Search ￭ The time displayed will be based on the time zone and daylight saving time (DST) applied time zone, so it may be displayed differently depending on whether the data time zone recorded at the same time and daylight saving time (DST) is applied.

  • Page 34: Event Search

    search event Search text Search You can search for various events by channel. You can search the data input to the POS device connected to the recorder. 1. Select <event search> in the <Search> menu. 1. Select <text search> in the <Search> menu. 2.

  • Page 35: Export Search

    export Search arB Search You can search the exported data on the connected storage device. Only data saved in recorder file format when You can search auto-recovery backup data stored on ARB storage devices. exported will be retrieved. 1. Select <arB search> in the <Search> menu. ￭...

  • Page 36: Bookmark Search

    search Bookmark Search Smart Search You can search for bookmarked data. You can search for events by selecting a region of interest, an exclusive region, or a virtual line from a recorded video at a specific time. ￭ To use smart search, you need to set the area of the camera's “Motion Detection" or “IVA” to the entire area. However, if you want to search for cameras after Wisenet X series, you must select “Enable"...

  • Page 37: Ai Search

    AI search perSon Search If there is AI data recorded by the camera, you can search for images in various conditions such as people, faces, and vehicles. In the recorded data, you can search for a person by any condition you want, such as gender, top/bottom color. ￭...

  • Page 38: Face Search

    AI search face Search vehicLe Search From the recorded data, you can search faces according to your desired conditions such as gender and age. You can search the vehicle by setting the vehicle type and color conditions from the recorded data. 1.

  • Page 39: Lp Search

    Lp Search Lpr Search You can search for vehicle license plates from the recorded data. You can search for the license plate number recognized in the recorded data. ￭ LPR search is only available on recorder models that support AI recognition. 1.

  • Page 40: Play

    play You can play the recorded data and export the video you want during playback. item Description Screen Layout of the pLay Playback control You can control video playback. Date/Time Set the date/time. Time line Move the playback position and display event data. You can change the number of channels displayed in the time line.

  • Page 41: Play Search Results

    pLay Search reSuLtS play Button name and function paused state time Line adjustment You can move the playback position and zoom the time line in and out. ● Click the desired play position in the time line. The playback start position will be moved. ￭...

  • Page 42: Search Results Export

    play Search reSuLtS export You can export the search results to a file. 1. Click the < > button. 2. Select a layout and channel to export. 3. Select a start date/time and an end date/time. ￭ If you changed the time zone of the recorder, select whether to apply DST. 4.

  • Page 43: Setup

    setup Setting the camera Sets the camera, recording, event, device, network, and system environment. You can access to the channel setup, camera settings, and profiles and camera password-related settings. Screen Layout of the Setup Setting the channel You can register a network camera for each channel and make connection between. Setup >...
  • Page 44 When you change the camera ID/password in the camera web viewer, if the camera is already registered in Recorder, you also have to – Wisenet Multi-Channel : You can register Hanwha Techwin's multi directional cameras and multi-imager change the camera ID/password information registered in Recorder.
  • Page 45 if you want to check the error details of camera registration ● Address type : Select an address type of the camera. ￭ The supported address type may differ depending on the type of the connected product. If you failed to register a camera, the reason for the failure will be displayed. connection failed due to unknown error.

  • Page 46: Setting The Camera Functions

    setup network camera firmware upgrade Setting the camera functions You can set the camera while viewing the live video of the selected camera. Setup > camera > camera setup ● Channel : Displays channel information. ￭ ● Model : Displays the camera model information. You can use this feature in the following cases : 1.
  • Page 47 Setting the profiles ● SSNR : Adjusts the brightness by reducing noise and minimizing afterimages even in dark places. Sens-up : Automatically adjusts the shutter speed according to the brightness of the current light. ● ● IRIS/Lens : Adjusts the brightness by automatically or manually adjusting the camera IRIS and lens. Setting the recording profile AGC : Adjust the brightness by amplifying the camera's electrical signal when images are shot in the dark.
  • Page 48 setup Setting the Live profile Setting the remote profile You can change the live transfer settings of the network camera. You can set the video profile transmitted to the network. Setup > camera > profile setup > Live Setup > camera > profile setup > remote : Displays the camera of the corresponding channel as a list or a thumbnail.
  • Page 49 editing the profiles Dewarping Setup Press the <Dewarping> button at the bottom of the <Detailed profile configuration> window to go to the You can change the video settings of a registered network camera for each channel. distortion correction setup popup window for each channel. Setup >...
  • Page 50 setup how to set WiseStream Dynamic goV/fpS setup Function to analyze the complexity of the video and effectively reduce the data size while maintaining the Dynamic GOV can be used to automatically change the length of GOV depending on the video condition. For quality.

  • Page 51: Setting Camera Password

    Setting camera password Setting the recorDing You can change the passwords of all registered cameras at once. You can setup scheduled recording, event recording and other recording related settings. You can register the camera’s ID and password. record schedule Setup > camera > camera password If you set a recording schedule for a specific date and time, the recording will start at that specific time.

  • Page 52: Record Setup

    setup ￭ record Setup If a channel's data transfer exceeds defined allowed limit, then it may affect to other channels, and may force switching to <I-frame> recording even when the channel is configured to <Full frame> recording mode. For Key Frame recording channels, the icon for limited You can set the resolution and number of recordings for each channel when an event occurs or during a normal recording appears on the live screen's top side.

  • Page 53: Setting The Event

    Setting the eVent event setup Sets whether or not to detect events (e.g. object detection, AI recognition, motion detection, intelligent video You can set the event-related settings such as whether or not an event is detected for each channel and whether an alarm occurs.
  • Page 54 setup ai recognition motion Setup > event > event setup > ai recognition Setup > event > event setup > motion ￭ AI recognition function is only available for recorder models that support AI engine function. Motion detection : You can set whether to enable motion detection. ●...
  • Page 55 tampering Setup > event > event setup > iVa Setup > event > event setup > tampering IVA : You can set whether to enable intelligent video analytics. Tampering detection : You can set whether to enable tampering detection. ● ●...

  • Page 56: Event Rule Setup

    setup event rule Setup ● Event action : Displays the event action set in the event rule. Item Description You can set the event trigger and action rule to output an alarm when an event occurs. Record/Go to preset Setup > event > event rule setup Alarm output E-mail Transfer images to FTP server...

  • Page 57: Alarm Input

    3. Set the details when the event rule setting window is displayed. alarm input ● Rule name : Enter the name of the event rule. You can set the operation of the alarm sensor. Event trigger : Click <+ add trigger> to set the event trigger and channel. ●...

  • Page 58: Schedule

    setup Schedule Setting the DeVice When setting the event rule, you can set the operating time of the event action. You can make the detailed settings for devices such as storage device and monitors. Setup > event > Schedule Storage Device You can set the storage device usage and check the setting status.
  • Page 59 ￭ ● Storage Status : Displays the working status of a storage device. Click the <View> to display the storage status The ARB feature is available only when your video is saved in the SD card after registering your Wisenet camera using the Wisenet protocol. window.
  • Page 60 setup connecting the iScSi adding an iScSi device This function is only available for products that support iSCSI. For products that support iSCSI, see page 4 “products supporting each feature” of the Product Specification Manual. When connecting an iSCSI device to the recorder, you can search for the iSCSI device and connect and disconnect Setup >...
  • Page 61 raiD mode setting raiD mode setting This function is only available for products that support RAID. For products that support RAID, see page 4 1. Click on the <enable> or <Setup> button. “products supporting each feature” of the Product Specification Manual. 2.
  • Page 62 setup Distributed recording S.m.a.r.t This function is only available for products that support distributed recording. For products that support You can check the connection status and details of the hard disk mounted in the recorder. distributed recording, see page 4 “products supporting each feature” of the Product Specification Manual. Setup >...

  • Page 63: Monitor

    monitor extended monitor setting This function is only available for products that support the use of an extended monitor. You can set the information displayed on the monitor as well as the output system. For products that support extended monitor, see page 4 “products supporting each feature” of the Product Setup >...

  • Page 64: Text

    setup Screen position setup text Some monitors many not display information (camera name, icon, time information, etc.) about the Recording, You can set the POS device setting to send text information and text event information. depending on the condition. Then, you can change the display position of the data. Device Settings You can make detailed settings for the POS device connected to the recorder.
  • Page 65 registering a text Device text event Settings You can set the text to receive an alarm when an event occurs. Setup > Device > text > event ● Total amount : Set the condition of the total amount to be notified when a text event occurs. Check whether the total amount is used, and then select the base amount and range.

  • Page 66: Setting The Network

    setup Setting the netWorK connecting and Setting the network Networking may differ from the connection method, check your environment before setting the connection You can set various network functions, such as monitoring live video by connecting to a network from a remote location mode.

  • Page 67: Ddns

    Setting the Dhcp ip address of the Broadband router DDnS ● 1. To access the Broadband Router's configurations, open a web browser on the local PC that is connected to the If a remote user accesses the network, you can set whether or not to use DDNS and the site to be connected. Broadband Router and enter the router's address (ex : http://192.168.1.1).

  • Page 68: Ip Filtering

    setup to check Quick connect status ip filtering A progress bar and its message appears for a Quick Connect. You can prepare the list of IP addresses to allow or block access to a specific IP address. Quick connect Success : Message for a successful connection. ●...

  • Page 69: Https

    httpS 802.1x You can choose a secured connection system or install a certificate. When connecting to a network, you can select whether to use the 802.1x protocol and install a corresponding certificate. Setup > network > httpS 802.1x is an authentication system between a server and a client, which prevents hacking, virus infection, and information leakage of transmitted and received network data.

  • Page 70: Ftp

    setup e-mail When an event occurs, it can be configured to send the event image to the FTP server. You can send an e-mail to a Recorder-registered user at a specific time interval, or if an event occurs. Setup > network > ftp Smtp Setting Sets the SMTP mail server.

  • Page 71: Snmp

    event Setting Snmp You can set the interval and type of the event that will be sent to the user. The SNMP protocol allows system or network administrators to remotely monitor and configure the network devices. Setup > network > e-mail > event Setup >...

  • Page 72: Dhcp Server

    setup Dhcp Server checking the status You can check the IP address assigned to the current DHCP server, MAC address, and the connected network port You can set the internal DHCP server and assign an IP address to the network camera. information.
  • Page 73 to set troubleshooting in the case of standby mode ● Device list & status : Shows the status of the normal recorder currently connected to the standby recorder. To 1. Set one recorder to <Standby> mode and the other recorder to <active> mode. delete the normal recorder connected, click <Delete>...

  • Page 74: P2P

    setup Setting the SyStem This function is only available for products that support P2P. For products that support P2P function, see page 4 You can set the date, language, authority, etc. displayed when using the system, and query system information or log “products supporting each feature”...

  • Page 75: User

    user ● Holiday : A user can select specific dates as holidays according to their own preferences. Select a holiday from the calendar displayed by clicking <Setup>. You can manage users, such as adding or deleting users and granting different authorities for each user. –...
  • Page 76 setup user setting if you want to register a user You can create user groups and set authorities for each group. You can manage user information such as registering and deleting users in the created user group. Setup > System > user > user 1.
  • Page 77 restriction Settings if the user has restricted access Set user's restricted access or network restriction. If a general user selects a menu to which they do not have access, an access restriction confirmation window will be displayed. If all rights are restricted, only the accessible menu of the live screen menu will be displayed, and Items with restrictions will require logging in for use.

  • Page 78: System Management

    setup System management to upgrade the current software version You can check the current system version and update to a new version, export data, setting initialization, and more. checking the System information You can check the current software version and MAC address before proceeding with the upgrade. Setup >...

  • Page 79: Log

    Settings Power down : If the power is off, the first alarm is generated. Select the <use the alarm output no. 1 when the ● device power is off> check box and click <apply> to clear all alarms set for alarm output 1, and then selecting You can export the information set in the recorder to a storage device and apply the same information to other alarm 1 with another alarm out will not be possible.
  • Page 80 setup checking the event log checking the export log You can search recorded events including alarms, camera events and video loss. You can search the user who performed the export and the execution time and details (time, channel, device, file It also shows the log and its timestamp.

  • Page 81: What Is Web Viewer

    starting web viewer What is Web VieWer? ConneCting Web VieWer Web Viewer is a software program with which the operator can access a remote Recorder for real-time monitoring, PTZ 1. Open your web browser and type the IP address or URL of Recorder into the URL address box. control (if configured) or search.

  • Page 82: Set The Recorder Password

    starting web viewer set the reCorder PassWord 2. Set the camera password in factory reset on the <Camera id/PW> screen. If ID/PW is already set in the camera, register the ID/PW and click <next>. After factory reset, the password must be set for the recorder to access the web viewer. Enter the password of the admin account, and click <Login>.
  • Page 83 4. Set the daylight saving time on the <time zone> screen, and then click <next>. 5. To modify the date and time on the <date & time> screen, select the <Modify> check box. Set the date and time. 6. Click the <next> button to complete the installation wizard. English _83...

  • Page 84: Screen Layout Of The Live Viewer

    Shows a list of events that occurred on the camera. Layout list Displays the default layout and a list of created layouts. You are directly connected to the Hanwha Techwin homepage (www.hanwha-security.com). PTZ Control Controls the connected PTZ camera. Changes the color theme of Web Viewer.

  • Page 85: Checking The System Status

    CheCking the systeM status CheCking CaMera List The icon at the top of the screen indicates the status of the system. Displays the camera type, status, and name registered in the recorder. Name Description Live > List Displayed when a problem occurs with the pan or recording status. Displayed when an error occurs in the power supply.

  • Page 86: Checking The All Camera Status

    live viewer CheCking the aLL CaMera status network status Click the < > button, followed by the <network> tab. You can check the status of all cameras connected to the recorder. You can check the status of network bandwidth currently being received/transmitted. Live status Click the <...

  • Page 87: Changing Overall Channel Aspect Ratio

    Changing the Pattern oF sPLit sCreen Changing oVeraLL ChanneL asPeCt ratio Click the < > button and select the desired split screen. Video screen ratio for all channels can be changed in live split screen mode. The selected split screen is applied to the video window. Click <...

  • Page 88: Full Screen Mode

    live viewer FuLL sCreen Mode setting uP the LiVe Layout You can change to full screen mode, which has no top/bottom/left/right areas of the live screen. This section outlines how to select a series of channels based on their purpose/accessibility and monitor them in a single layout.

  • Page 89: Change Of Layout Channel And Name

    Change of Layout Channel and name reaL-tiMe eVent Monitoring Real-time events that occurred on the camera can be checked in the live video window and event list. 1. Click < > after selecting a layout. ￭ AI events are only available for products that support AI. 2.

  • Page 90: Check Event List

    live viewer Check event List event instant Viewer When new events occur, the list of events will be updated accordingly. Select an event to check from the event list, and click < > to play the recorded video at the time the event ￭...

  • Page 91: Live Screen Menu

    LiVe sCreen Menu CaMera Video ControL After selecting the desired channel on the split mode, roll the mouse cursor over the screen to see the live screen menu. By using the function icon in the video window, you can easily enable functions such as screenshot, video rotation, and PTZ control.

  • Page 92: Instant Viewer

    live viewer instant Viewer Ptz Mode During monitoring, you can rewind 1 minute before playback. You can run PTZ control of the selected channel. Select the desired channel and click < >. Select the desired channel and click < >. The Instant Viewer screen appears.

  • Page 93: Zoom In

    zoom in Channel aspect ratio You can zoom in or out using the mouse wheel. You can change the aspect ratio of each channel. If you scroll up using the mouse wheel, the selected video screen is enlarged by 10%, and a thumbnail window is Select the desired channel and click <...

  • Page 94: Ptz Control Ptz Control Menu

    live viewer Ptz ControL using digital Ptz (d-Ptz) function Ptz Control Menu 1. Register a camera that supports the D-PTZ profile. ￭ In cameras that support the D-PTZ profile, you can use the D-PTZ function. If the connected network camera is a PTZ camera, the < >...

  • Page 95: Running Preset

    to delete a registered preset exPorting Video 1. Click < You can export the recorded video by manually inputting the desired channel, date, and time. >. 2. Select the preset to delete, and click <delete>. 1. Click the < > button. 3.

  • Page 96: Screen Layout Of The Search Viewer

    search viewer tiMe searCh You can search and play the recorded video stored in the recorder by connecting the recorder remotely. You can search the recorded data by the desired date and time conditions. sCreen Layout oF the searCh VieWer ￭...

  • Page 97: Event Search

    eVent searCh text searCh You can search for various events by channel. You can search the data input to the POS device connected to the recorder. 1. Select <event search> in the <search> menu. 1. Select < text search> in the <search> menu. 2.

  • Page 98: Bookmark Search

    search viewer bookMark searCh searCh resuLts exPort You can search for bookmarked data. Search results of events, texts and bookmarks can be exported to a file. example) bookmark search result export 1. Click < > in the search results list. 1.

  • Page 99: Screen Layout Of The Ai Search Viewer

    AI search viewer Person searCh If there is AI data recorded by the camera, you can search for images in various conditions such as people, faces, and vehicles. In the recorded data, you can search for a person by any condition you want, such as gender, top/bottom color. ￭...

  • Page 100: Face Search

    AI search viewer FaCe searCh VehiCLe searCh From the recorded data, you can search faces according to your desired conditions such as gender and age. You can search the vehicle by setting the vehicle type and color conditions from the recorded data. 1.

  • Page 101: Lp Search

    LP searCh LPr searCh You can search for vehicle license plates from the recorded data. You can search for the license plate number recognized in the recorded data. ￭ LPR search is only available on recorder models that support AI recognition. 1.

  • Page 102: Search Results Export

    AI search viewer searCh resuLts exPort Search results such as people, faces, and vehicles can be exported to a file. example) Person search results export 1. Click < > in the search results list. 2. Select the desired list and click <ok>. ￭...

  • Page 103: Play Search Results

    play PLay searCh resuLts exPort Video by seCtion setuP You can play the recorded data and export the video you want during playback. You can select the desired section from the time line or search list during video playing and export it to a file. 1.

  • Page 104: Play Button Name And Function

    play Play button name and Function Paused state Playback state Name Description Previous event Go to the previous event video. Previous frame Moves backward to the key frame (I-frame). Playback Play the video. Next frame Moves forward one frame or more. Next event Go to the next event video.

  • Page 105: Setup Viewer

    setup viewer setting the CaMera You can configure the Recorder settings remotely on the network. You can check a list of cameras that are connected to the Recorder and configure the necessary settings. sCreen Layout oF the setuP VieWer For details, refer to the "setup > setting the Camera" page in the Table of Contents. Channel setup You can register a network camera for each channel and make a connection between them.

  • Page 106: Profile Setup

    setup viewer When you click the <Camera webviewer> button, a new camera web browser window is opened. Profile setup ● – This is not supported if the camera is connected to the RTSP protocol. You can set the profile for a network camera. –...

  • Page 107: Setting The Recording

    remote setting the reCording You can set the video profile transmitted to the network and the expansion monitor. For details, refer to the "setup > setting the recording" page in the Table of Contents. record schedule If you set a recording schedule for a specific date and time, the recording will start at that specific time. setup >...

  • Page 108: Record Options

    setup viewer record options setting the eVent You can set the hard disk recording option. For details, refer to the "setup > setting the event" page in the Table of Contents. ￭ You can set the recording duration separately for each channel. ai engine setup >...
  • Page 109 ai recognition Motion detection You can change the AI recognition event setup. You can change the settings for motion detection events. ￭ ￭ Settings and operating specifications may differ depending on the recorder model and camera. Detailed video analysis can be set by accessing the Camera webviewer. Mask detection You can change the mask detection event setup.

  • Page 110: Event Rule Setup

    setup viewer tampering detection alarm input You can change the tampering detection event setup. You can set the operation of the alarm sensor. setup > event > alarm input event rule setup You can set the event trigger and action rule to output an alarm when an event occurs. onViF setup setup >...

  • Page 111: Schedule

    schedule setting the deViCe Whether to output an alarm can be scheduled according to the day and time. You can check a list of devices that are connected to the Recorder and configure the necessary settings. The initial setting will be an event sync, and an alarm will be sent only when an event occurs. For details, refer to the "setup >...

  • Page 112: Monitor

    setup viewer raid s.M.a.r.t This function is only available for products that support RAID. You can check the connection status and details of the hard disk mounted in the recorder. You can set the RAID (Redundant Array of Independent Disks) mode. Monitor distributed recording You can set the information displayed on the monitor as well as the output system.

  • Page 113: Text

    text setting the netWork You can set the POS device text display and event text settings. For details, refer to the "setup > setting the network" page in the Table of Contents. setup > device > text iP & Port device A remote user can access the Recorder via the network to check the current mode and the IP address.

  • Page 114: Ddns

    setup viewer ddns httPs You can set DDNS. You can select a security connection system or install public certificates. setup > network > ddns setup > network > httPs ￭ While using HTTPS, if you want to switch to HTTP, then abnormal operation can take place as the browser contains the setting values. You need iP Filtering to change the URL to HTTP and reconnect or initialize the cookie setting of the browser.
  • Page 115 event You can set the event interval and specify which events the server sends mails for. When an event occurs, you can create settings related to the FTP server to which images will be transferred. setup > network > FtP recipient You can set groups and recipients to receive emails.

  • Page 116: Snmp

    setup viewer snMP status You can check the IP and MAC currently used through the DHCP server, and the connected network port. Using the SNMP protocol, the system or network administrator can remotely monitoring the network devices and sets the environment. setup >...

  • Page 117: Setting The System

    setting the systeM user You can manage users, such as adding or deleting users and granting different authorities for each user. You can configure the various settings of the Recorder system. For details, refer to the "setup > setting the system" page in the Table of Contents. setup >...

  • Page 118: System Management

    setup viewer restriction settings settings You can set the user permission. Using a storage device, you can apply the current configuration of Recorder to another Recorder. Press the Initialization button to return the network settings to their factory default state. Items in the <exception>...
  • Page 119 event log The event log lists recorded events, such as sensor events, camera events, or image losses. export log You can search the user who performed the export and the execution time and details (time, channel, device, file type). English _119...
  • Page 120 export viewer seC baCkuP VieWer screen Layout of the backup Viewer You can play a file that is backed up in the format of SEC. Backup in SEC format produces backup data file, library file and self-executable viewer file. If you run the backup file viewer, the backup data file will be played. XRN-1620B2_CAM 01 2020-05-14 20 :54 :13 recommended system requirements...
  • Page 121 Name Description Saves the current video's image as in an image file. Supports JPEG file format. Screen Printout Prints out the current screen. You should have installed the appropriate printer driver before you can print out the screen. A toggle button. Each time you press this button, the audio output will toggle between activated and deactivated.
  • Page 122 appendix use JoystiCk using VirtuaL keyboard The function is only available for the product that supports a joystick. For products that support joy stick, see page 4 "Products supporting each feature” of the Product Specification Manual. The SPC-2000 joystick is operated as follows : 1.
  • Page 123 troubLeshooting Problem Action Problem Action The camera is not connected or the PC fails to connect to the ● Check if the network cable is connected properly. The frame number set for multiple data transmission set in camera or network environment Live video will be slow or cut off.
  • Page 124 appendix Problem Action Problem Action Exported data cannot be played on a PC or recorder. ● When setting the file format for exporting, first decide whether the device to be played is a PC ● If the sum of input data for each channel exceeds the limit, the alarm icon and the pop up In the live screen, the <...

This manual is also suitable for:

Wisenet prn-3200b4Wisenet xrn-3210b2

Table of Contents