Hanwha Techwin Wisenet XRN-6410RB2-24TB User Manual
  1. Manuals
  2. Brands
  3. Hanwha Techwin Manuals
  4. Network Hardware
  5. Wisenet XRN-6410RB2-24TB
  6. User manual

Hanwha Techwin Wisenet XRN-6410RB2-24TB User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
NETWORK VIDEO RECORDER
User Manual
Wisenet NVR

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Wisenet XRN-6410RB2-24TB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Hanwha Techwin Wisenet XRN-6410RB2-24TB

Summary of Contents for Hanwha Techwin Wisenet XRN-6410RB2-24TB

  • Page 1 NETWORK VIDEO RECORDER User Manual Wisenet NVR...
  • Page 2 ❖ Design and specifications are subject to change without prior notice. You can download the latest version from the Hanwha Techwin web site. (www.hanwha-security.com) ❖ The initial administrator ID is “admin” and the password should be set when logging in for the first time.

  • Page 3: Overview

    Monitor real time events that occur in Recorder, sensors, and cameras or search through logs Before using this product, check if the latest version of this software is installed. Go to Hanwha Techwin's website (http:// www.hanwha-security.com) to check the software version and download necessary files.
  • Page 4 overview CAuTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ● ACCORDING TO THE INSTRUCTIONS. Do not ingest battery, Chemical Burn Hazard. ● This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause ●...

  • Page 5: Table Of Contents

    CONTENTS OVERVIEW Important Safety Instructions Real-Time Event Monitoring Product User Manual Description Check Event List Target Audience Event Search How to Use the Product Event Instant Viewer Contents Stop Alarm Output Camera Video Control Capture gETTINg STARTED Starting the system Instant Viewer installation Wizard Temperature Detection Mode...
  • Page 6 overview AI SEARCH Screen Layout of the AI Search Setting the Device Storage Device Person Search Face recognition search Distributed Recording Face Search S.M.A.R.T Vehicle Search Monitor LP Search Text LPR SEARCH Setting the Network IP & Port DDNS PlAy Screen Layout of the Play IP Filtering Play Search Results...
  • Page 7 lIVE VIEWER Screen Layout of the Live Viewer PTZ Control Checking the System Status PTZ Control Menu Checking User ID Using Digital PTZ (D-PTZ) function Checking Camera List Preset Checking the All Camera Status Running Preset Live Status Running Swing (auto pan), Group (scan), Tour, or Trace (pattern) Record Status Exporting Video...
  • Page 8 overview SETuP VIEWER ExPORT VIEWER 105 Screen Layout of the Setup Viewer 119 SEC Backup Viewer 119 Recommended System Requirements 105 Setting the Camera 105 Register 119 Screen Layout of the Backup Viewer 105 Channel Setup 106 Camera Setup 106 Profile Setup APPENDIx 121 Use Joystick 107 Camera Password...

  • Page 9: Getting Started

    getting started STARTINg THE SySTEM INSTAllATION WIzARD As shown below, proceed through each step of the <Installation wizard>. 1. Connect the power cable of the recorder to the wall outlet. Install Wizard can only be accessed at factory reset. If you do not want to proceed, click <Exit>. 2.
  • Page 10 getting started Setting up the network 3. Set the administrator password on the <Recorder ID/PW> screen and click the <Next>. Each product supports a different number of network ports. If it supports two or more network ports, you can set Click <...
  • Page 11 5. Set the date, time, and daylight saving time on the <Date & Time> screen, and then click the <Next>. 7. On the <Channel setup> screen, you can view the camera videos registered to each channel in thumbnails along with thumbnail information. To change the camera video position, select a video and drag and drop it to the desired location.

  • Page 12: Shutting Down The System

    getting started SHuTTINg DOWN THE SySTEM lOgIN To use the Recorder menu, you are required to login as a user that is authorized to access the applicable menu. 1. Select <Shutdown> at the top right of the screen. 1. Select <login> at the top right of the screen. 2.
  • Page 13 live Shows the video of the camera connected to the recorder. Also, you can adjust the camera and check the network Item Description transfer status. Displays information of the OSD screen on the video window. SCREEN lAyOuT Of THE lIVE Shows channel information.

  • Page 14: Checking The System Status

    live Checking the System Status Item Description The icon at the top of the screen indicates the status of the system. Displayed if the server has firmware to update. It is displayed when the system is overloaded. ￭ Limit the number of users remotely monitored by Web Viewer or VMS, or control the number of events displayed in the event list of the recorder.

  • Page 15: Check Camera List

    Check Camera list live Screen Menu Displays the camera type, status, and name registered in the recorder. After selecting the desired channel on the split mode, roll the mouse cursor over the screen to see the live screen menu. The live screen menu appears differently depending on the recorder operation status or the type of the registered camera.

  • Page 16: Icons On The Live Screen

    live Icons on the live Screen Item Description You can check the status or operation with the icons on the live screen. Events from the recorder and camera are displayed in icons. ￭ Event Display For details, refer to the "Setup > Setting the Event > Event rule setup" page in the The icons displayed on the screen may differ depending on the type of camera and the user's authority.

  • Page 17: Live Screen Mode

    ￭ lIVE SCREEN MODE Each product may support different split view modes. You can display your camera's live video in various split modes. ￭ The 'Live4NVR' profile is added automatically with network camera auto registration, and settings can be changed according to user environment.

  • Page 18: Switching The Split Mode

    live Switching the Split Mode Example 2) 16-channel model You can split the live video from cameras to Single, 4-split, 9-Split, or 16-split mode and watch them one by one. ￭ Each product supports different split modes. 13-16 Auto Sequence 10-16 To switch the screen automatically, click <...

  • Page 19: Osd Information Display

    OSD Information Display Channel Information Display You can show or hide the recording status, camera status, event display, etc. in the video window. You can check the information of the video being recorded with each camera. To show or hide the OSD information, click < >...

  • Page 20: Check The Camera Status

    live Check the Camera Status Record Status If you select <Record> in the <Status> menu, you can check the profile, record type, frame rate (Input/Record), You can check the status of all cameras connected to the recorder. and bit rate (Limit/Input/Record) for each channel. To check the camera status, click <...

  • Page 21: Channel Setting

    CH10 CH11 CH12 CH10 CH11 CH12 CH13 CH14 CH15 CH13 CH14 CH15 CH16 CH16 Network Status ● Enable: Turns on/off the power supply to the camera. – Checked ( ): Power supply available CH19 CH19 Select <Network> in the <Status> menu to check the status of network bandwidth currently being received/ CH10 CH10 CH11...

  • Page 22: Changing Overall Channel Aspect Ratio Search

    live Changing Overall Channel Aspect Ratio full Screen Mode Video screen ratio for all channels can be changed in live split screen mode. You can change to full screen mode, which has no top/bottom/left/right areas of the live screen. Click < >...

  • Page 23: Setting Up The Live Layout

    SETTINg uP THE lIVE lAyOuT Change of layout Channel and Name This section outlines how to select a series of channels based on their purpose/accessibility and monitor them in a 1. Click < > after selecting a layout. single layout. 2.

  • Page 24: Real-Time Event Monitoring

    live Play layout Sequence REAl-TIME EVENT MONITORINg Click < Play sequence> at the bottom of the layout list to automatically switch the layout according to the Real-time events that occurred on the camera can be checked in the live video window and event list. sequence settings.

  • Page 25: Event Search

    Event Search Event Instant Viewer You can browse events by camera and event type. Select an event to check from the event list, and click < > to play the recorded video at the time the event occurred. To search for a specific event, click < >...

  • Page 26: Camera Video Control

    live CAMERA VIDEO CONTROl Instant Viewer You can move the video back 30 seconds and play it while live monitoring. Instant viewer plays video from 30 By using the function icon of the video window, you can easily use the functions of capture, video zoom, PTZ camera and thermal imaging camera.

  • Page 27: Ptz Mode

    PTz Mode zoom In You can run PTZ control of the selected channel. You can zoom in or out the video via digital zoom. Select the desired channel and click < >. Select the desired channel and click < >. Enters the PTZ control mode.

  • Page 28: Display Text

    live Display Text Change Channel Aspect Ratio You can monitor texts regarding the sales record received from POS in real time. You can change the aspect ratio of each channel. ￭ Select the desired channel and click < >. This is executable when a text device is connected. ￭...

  • Page 29: Ptz Control

    PTZ driver (physical device). ￭ It only supports a network camera with Hanwha Techwin's PTZ function and a camera registered in the ONVIF. Group The group function enables you to group various presets before calling them in sequence.

  • Page 30: Using Digital Ptz (D-Ptz) Function

    live using Digital PTz (D-PTz) function To delete a registered preset 1. Click < >. 1. Register a camera that supports the D-PTZ profile. ￭ 2. Click < >. <Delete preset> window will appear. In cameras that support the D-PTZ profile, you can use the D-PTZ function. 2.

  • Page 31: Exporting The Recorded Video

    ￭ ExPORTINg THE RECORDED VIDEO If you insert a USB memory stick with insufficient storage space, volume calculation may be disabled. Format the memory stick or delete some of the data on the memory stick to secure adequate storage space. ￭...

  • Page 32: Screen Layout Of The Search

    search search TIME SEARCH You can search recorded video by various conditions such as time, event, and export. You can search the recorded data by the desired date and time conditions. SCREEN lAyOuT Of THE SEARCH ￭ The time displayed will be based on the time zone and daylight saving time (DST) applied time zone, so it may be displayed differently depending on whether the data time zone recorded at the same time and daylight saving time (DST) is applied.

  • Page 33: Event Search

    EVENT SEARCH TExT SEARCH You can search for various events by channel. You can search the data input to the POS device connected to the recorder. 1. Select <Event search> in the <Search> menu. 1. Select <Text search> in the <Search> menu. 2.

  • Page 34: Export Search

    search ExPORT SEARCH ARb SEARCH You can search the exported data on the connected storage device. Only data saved in recorder file format when You can search auto-recovery backup data stored on ARB storage devices. exported will be retrieved. 1. Select <ARb search> in the <Search> menu. ￭...

  • Page 35: Bookmark Search

    bOOKMARK SEARCH SMART SEARCH You can search for bookmarked data. You can search for events by selecting a region of interest, an exclusive region, or a virtual line from a recorded video at a specific time. ￭ To use smart search, you need to set the area of the camera's “Motion Detection" or “IVA” to the entire area. However, if you want to search for cameras after Wisenet X series, you must select “Enable"...

  • Page 36: Ai Search

    AI search AI search PERSON SEARCH If there is AI data recorded by the camera, you can search for images in various conditions such as people, faces, and vehicles. In the recorded data, you can search for a person by any condition you want, such as gender, top/bottom color. SCREEN lAyOuT Of THE AI SEARCH 1.

  • Page 37: Face Recognition Search

    fACE RECOgNITION SEARCH 5. Set the similarity. 6. Select the overlap. You can search for registered face images from the recorded data. It will be displayed when there is overlapped data in one channel by changing the time or time zone at the selected ￭...

  • Page 38: Face Search

    AI search fACE SEARCH VEHIClE SEARCH From the recorded data, you can search faces according to your desired conditions such as gender and age. You can search the vehicle by setting the vehicle type and color conditions from the recorded data. 1.

  • Page 39: Lp Search

    lP SEARCH lPR SEARCH You can search for vehicle license plates from the recorded data. You can search for the license plate number recognized in the recorded data. ￭ LPR search is only available on recorder models that support AI recognition. 1.

  • Page 40: Play

    play play You can play the recorded data and export the video you want during playback. Item Description SCREEN lAyOuT Of THE PlAy Time line Move the playback position and display event data. You can change the number of channels displayed in the time line. ￭...

  • Page 41: Play Search Results

    PlAy SEARCH RESulTS Play button Name and function Paused state Time line Adjustment You can move the playback position and zoom the time line in and out. ● Click the desired play position in the time line. The playback start position will be moved. ￭...

  • Page 42: Search Results Export

    play SEARCH RESulTS ExPORT You can export the search results to a file. 1. Click the < > button. 2. Select a layout and channel to export. 3. Select a start date/time and an end date/time. ￭ If you changed the time zone of the recorder, select whether to apply DST. 4.

  • Page 43: Setup

    setup SETTINg THE CAMERA Sets the camera, recording, event, device, network, and system environment. You can access to the channel setup, camera settings, and profiles and camera password-related settings. SCREEN lAyOuT Of THE SETuP Setting the Channel You can register a network camera for each channel and make connection between. Setup >...
  • Page 44 When you change the camera ID/password in the camera web viewer, if the camera is already registered in Recorder, you also have to – Wisenet Multi-Channel : You can register Hanwha Techwin's multi directional cameras and multi-imager change the camera ID/password information registered in Recorder.
  • Page 45 If you want to check the error details of camera registration ● Address type : Select an address type of the camera. ￭ The supported address type may differ depending on the type of the connected product. If you failed to register a camera, the reason for the failure will be displayed. Connection failed due to unknown error.

  • Page 46: Setting The Camera Functions

    setup Network Camera firmware upgrade Setting the Camera functions You can set the camera while viewing the live video of the selected camera. Setup > Camera > Camera setup ● Channel : Displays channel information. ￭ ● Model : Displays the camera model information. You can use this feature in the following cases : 1.

  • Page 47: Setting The Profiles

    Setting the Profiles ● SSNR : Adjusts the brightness by reducing noise and minimizing afterimages even in dark places. Sens-up : Automatically adjusts the shutter speed according to the brightness of the current light. ● ● IRIS/Lens : Adjusts the brightness by automatically or manually adjusting the camera IRIS and lens. Setting the Recording Profile AGC : Adjust the brightness by amplifying the camera's electrical signal when images are shot in the dark.
  • Page 48 setup Setting the live Profile Setting the Remote Profile You can change the live transfer settings of the network camera. You can set the video profile transmitted to the network. Setup > Camera > Profile setup > live Setup > Camera > Profile setup > Remote : Displays the camera of the corresponding channel as a list or a thumbnail.
  • Page 49 Editing the Profiles Dewarping Setup Press the <Dewarping> button at the bottom of the <Detailed profile configuration> window to go to the You can change the video settings of a registered network camera for each channel. distortion correction setup popup window for each channel. Setup >...
  • Page 50 setup How to set WiseStream Dynamic gOV/fPS setup Function to analyze the complexity of the video and effectively reduce the data size while maintaining the Dynamic GOV can be used to automatically change the length of GOV depending on the video condition. For quality.

  • Page 51: Setting Camera Password

    Setting Camera Password SETTINg THE RECORDINg You can change the passwords of all registered cameras at once. You can setup scheduled recording, event recording and other recording related settings. You can register the camera’s ID and password. Record schedule Setup > Camera > Camera password If you set a recording schedule for a specific date and time, the recording will start at that specific time.

  • Page 52: Record Options

    setup ￭ Record Setup If a channel's data transfer exceeds defined allowed limit, then it may affect to other channels, and may force switching to <I-frame> recording even when the channel is configured to <Full frame> recording mode. For Key Frame recording channels, the icon for limited You can set the resolution and number of recordings for each channel when an event occurs or during a normal recording appears on the live screen's top side.

  • Page 53: Setting The Event

    SETTINg THE EVENT ● Object detection : Sets whether or not to enable object detection for the camera. AI recognition : Sets whether or not to enable AI recognition function for the camera. ● ￭ You can set the event-related settings such as whether or not an event is detected for each channel and whether an AI recognition works only when the object detection option is set to <Enable>.

  • Page 54: Event Setup

    setup Event setup AI recognition Sets whether or not to detect events (e.g. object detection, AI recognition, motion detection, intelligent video Setup > Event > Event setup > AI recognition analytics, tampering) sent by the camera for each channel and applies detailed settings. Setup >...
  • Page 55 Mask Motion Setup > Event > Event setup > Mask Setup > Event > Event setup > Motion Mask detection : Sets whether or not to use mask detection. Motion detection : You can set whether to enable motion detection. ●...
  • Page 56 setup Tampering Setup > Event > Event setup > IVA Setup > Event > Event setup > Tampering IVA : You can set whether to enable intelligent video analytics. Tampering detection : You can set whether to enable tampering detection. ●...

  • Page 57: Event Rule Setup

    Event Rule Setup Event action : Displays the event action set in the event rule. ● You can set the event trigger and action rule to output an alarm when an event occurs. Item Description Setup > Event > Event rule setup PTZ preset Alarm output E-mail...

  • Page 58: Alarm Input

    setup Event action : Click <+ Add action> to set the event action. Alarm Input ● – PTZ preset : Set the PTZ preset to be displayed when an event occurs. Click < > to set camera presets You can set the operation of the alarm sensor. for each channel.

  • Page 59: Schedule

    Schedule SETTINg THE DEVICE When setting the event rule, you can set the operating time of the event action. You can make the detailed settings for devices such as storage device and monitors. Setup > Event > Schedule Storage Device You can set the storage device usage and check the setting status.
  • Page 60 setup ￭ ● Storage Status : Displays the working status of a storage device. Click the <View> to display the storage status The ARB feature is available only when your video is saved in the SD card after registering your Wisenet camera using the Wisenet protocol. window.
  • Page 61 Connecting the iSCSI Adding an iSCSI device This function is only available for products that support iSCSI. When connecting an iSCSI device to the recorder, you can search for the iSCSI device and connect and disconnect Setup > Device> Storage device > iSCSI 1.
  • Page 62 setup RAID mode setting ● Model : Displays the registered RAID model. ● Status : Displays the current operating condition of the HDDs installed in a RAID. This function is only available for products that support RAID. – Active : Displays that the HDD is operating normally. If you enable the RAID (Redundant Array of Independent Disks) mode, you can safely recover your data even if –...

  • Page 63: Distributed Recording

    RAID mode setting Distributed Recording This function is only available for products that support distributed recording. 1. Click on the <Enable> or <Setup> button. You can save recordings in a distributed manner by distributing HDD(s) of each group. 2. In the use RAID window, select settings of RAID and click on the < OK> button. ●...

  • Page 64: S.m.a.r.t

    setup S.M.A.R.T Monitor You can check the connection status and details of the hard disk mounted in the recorder. You can set the information displayed on the monitor as well as the output system. Setup > Device> Storage device > S.M.A.R.T Setup >...
  • Page 65 Extended monitor setting Screen position setup This function is only available for products that support the use of an extended monitor. Some monitors many not display information (camera name, icon, time information, etc.) about the Recording, depending on the condition. Then, you can change the display position of the data. 1.

  • Page 66: Text

    setup Text Registering a Text Device You can set the POS device setting to send text information and text event information. Device Settings You can make detailed settings for the POS device connected to the recorder. Setup > Device > Text > Device ●...

  • Page 67: Setting The Network

    Text Event Settings SETTINg THE NETWORK You can set the text to receive an alarm when an event occurs. You can set various network functions, such as monitoring live video by connecting to a network from a remote location and receiving an event by e-mail. Setup >...
  • Page 68 setup Connecting and Setting the Network Setting the DHCP IP Address of the broadband Router ● Networking may differ from the connection method, check your environment before setting the connection 1. To access the Broadband Router's configurations, open a web browser on the local PC that is connected to the mode.

  • Page 69: Ddns

    DDNS To check Quick Connect status A progress bar and its message appears for a Quick Connect. If a remote user accesses the network, you can set whether or not to use DDNS and the site to be connected. Quick Connect Success : Message for a successful connection. ●...

  • Page 70: Ip Filtering

    setup IP filtering HTTPS You can prepare the list of IP addresses to allow or block access to a specific IP address. You can choose a secured connection system or install a certificate. Setup > Network > IP filtering Setup > Network > HTTPS ●...

  • Page 71: 802.1X

    802.1x E-mail When connecting to a network, you can select whether to use the 802.1x protocol and install a corresponding You can send an e-mail to a Recorder-registered user at a specific time interval, or if an event occurs. certificate. SMTP Setting 802.1x is an authentication system between a server and a client, which prevents hacking, virus infection, and information leakage of transmitted and received network data.

  • Page 72: Snmp

    setup Event Setting SNMP You can set the interval and type of the event that will be sent to the user. The SNMP protocol allows system or network administrators to remotely monitor and configure the network devices. Setup > Network > E-mail > Event Setup >...

  • Page 73: Dhcp Server

    DHCP Server Checking the status You can check the IP address assigned to the current DHCP server, MAC address, and the connected network port You can set the internal DHCP server and assign an IP address to the network camera. information.
  • Page 74 setup To set troubleshooting In the case of standby mode Device list & status : Shows the status of the normal recorder currently connected to the standby recorder. To ● 1. Set one recorder to <Standby> mode and the other recorder to <Active> mode. delete the normal recorder connected, click <Delete>...

  • Page 75: P2P

    SETTINg THE SySTEM This function is only available for products that support P2P. You can set the date, language, authority, etc. displayed when using the system, and query system information or log information. You can connect the recorder to Wisenet Mobile for easy use when using P2P service. Setup >...

  • Page 76: User

    setup user ● Holiday : A user can select specific dates as holidays according to their own preferences. Select a holiday from the calendar displayed by clicking <Setup>. You can manage users, such as adding or deleting users and granting different authorities for each user. –...
  • Page 77 user setting If you want to register a user You can create user groups and set authorities for each group. You can manage user information such as registering and deleting users in the created user group. Setup > System > user > user 1.
  • Page 78 setup Restriction Settings If the user has restricted access Set user's restricted access or network restriction. If a general user selects a menu to which they do not have access, an access restriction confirmation window will be displayed. If all rights are restricted, only the accessible menu of the live screen menu will be displayed, and Items with restrictions will require logging in for use.

  • Page 79: System Management

    System Management To upgrade the current software version You can check the current system version and update to a new version, export data, setting initialization, and more. Checking the System information You can check the current software version and MAC address before proceeding with the upgrade. Setup >...

  • Page 80: Log

    setup Settings Power down : If the power is off, the first alarm is generated. Select the <use the alarm output no. 1 when the ● device power is off> check box and click <Apply> to clear all alarms set for alarm output 1, and then selecting You can export the information set in the recorder to a storage device and apply the same information to other alarm 1 with another alarm out will not be possible.
  • Page 81 Checking the event log Checking the export log You can search recorded events including alarms, camera events and video loss. You can search the user who performed the export and the execution time and details (time, channel, device, file It also shows the log and its timestamp. type).

  • Page 82: What Is Web Viewer

    starting web viewer WHAT IS WEb VIEWER? CONNECTINg WEb VIEWER Web Viewer is a software program with which the operator can access a remote Recorder for real-time monitoring, PTZ 1. Open your web browser and type the IP address or URL of Recorder into the URL address box. control (if configured) or search.

  • Page 83: Installation Wizard

    INSTAllATION WIzARD 3. Set the network connection type and the connection environment on the <Network> screen, and then click the <Next> button. As shown below, proceed through each step of the <Installation wizard>. Install Wizard can only be accessed at factory reset. If you do not want to proceed, click <Exit>. ￭...

  • Page 84: Live Viewer

    Description The ID of the connected user is displayed. Menu Click each menu to go to the corresponding menu screen. You are directly connected to the Hanwha Techwin homepage (www.hanwha-security.com). : Select to check the camera list. ● List List/Event Changes the color theme of Web Viewer.

  • Page 85: Checking The System Status

    CHECKINg THE SySTEM STATuS CHECKINg CAMERA lIST The icon at the top of the screen indicates the status of the system. Displays the camera type, status, and name registered in the recorder. Name Description live > list Displayed when a problem occurs with the pan or recording status. Displayed when an error occurs in the power supply.

  • Page 86: Checking The All Camera Status

    live viewer CHECKINg THE All CAMERA STATuS Network Status Click the < > button, followed by the <Network> tab. You can check the status of all cameras connected to the recorder. You can check the status of network bandwidth currently being received/transmitted. live Status Click the <...

  • Page 87: Changing Overall Channel Aspect Ratio

    CHANgINg THE PATTERN Of SPlIT SCREEN CHANgINg OVERAll CHANNEl ASPECT RATIO Click the < > button and select the desired split screen. Video screen ratio for all channels can be changed in live split screen mode. The selected split screen is applied to the video window. Click <...

  • Page 88: Full Screen Mode

    live viewer full SCREEN MODE SETTINg uP THE lIVE lAyOuT You can change to full screen mode, which has no top/bottom/left/right areas of the live screen. This section outlines how to select a series of channels based on their purpose/accessibility and monitor them in a single layout.

  • Page 89: Change Of Layout Channel And Name

    Change of layout Channel and Name REAl-TIME EVENT MONITORINg Real-time events that occurred on the camera can be checked in the live video window and event list. 1. Click < > after selecting a layout. ￭ AI events are only available for products that support AI. 2.

  • Page 90: Check Event List

    live viewer Check Event list Event Instant Viewer When new events occur, the list of events will be updated accordingly. Select an event to check from the event list, and click < > to play the recorded video at the time the event ￭...

  • Page 91: Live Screen Menu

    lIVE SCREEN MENu CAMERA VIDEO CONTROl After selecting the desired channel on the split mode, roll the mouse cursor over the screen to see the live screen menu. By using the function icon in the video window, you can easily enable functions such as screenshot, video rotation, and PTZ control.

  • Page 92: Ptz Mode

    live viewer PTz Mode zoom In You can run PTZ control of the selected channel. You can zoom in or out using the mouse wheel. Select the desired channel and click < >. If you scroll up using the mouse wheel, the selected video screen is enlarged by 10%, and a thumbnail window is displayed.

  • Page 93: Ptz Control

    PTz CONTROl using Digital PTz (D-PTz) function PTz Control Menu 1. Register a camera that supports the D-PTZ profile. ￭ In cameras that support the D-PTZ profile, you can use the D-PTZ function. If the connected network camera is a PTZ camera, the < >...

  • Page 94: Running Preset

    live viewer To delete a registered preset ExPORTINg VIDEO You can export the recorded video by manually inputting the desired channel, date, and time. 1. Click < >. 2. Select the preset to delete, and click <Delete>. 1. Click the < >...

  • Page 95: Screen Layout Of The Search Viewer

    search viewer You can search and play the recorded video stored in the recorder by connecting the recorder remotely. Name Description SCREEN lAyOuT Of THE SEARCH VIEWER Turns on/off the section setup. Saves the video of the selected channel in the designated path in AVI format. The date of the recorded video is displayed in orange, and the current date is displayed in a orange circle.

  • Page 96: Time Search

    search viewer TIME SEARCH TExT SEARCH You can search the recorded data by the desired date and time conditions. You can search the data input to the POS device connected to the recorder. ￭ The time displayed will be based on the time zone and daylight saving time (DST) applied time zone, so it may be displayed differently depending on whether the data time zone recorded at the same time and daylight saving time (DST) is applied.

  • Page 97: Bookmark Search

    bOOKMARK SEARCH SEARCH RESulTS ExPORT You can search for bookmarked data. Search results of events, texts and bookmarks can be exported to a file. Example) bookmark search result export 1. Click < > in the search results list. 1. Select < >...

  • Page 98: Screen Layout Of The Ai Search Viewer

    AI search viewer AI search viewer PERSON SEARCH If there is AI data recorded by the camera, you can search for images in various conditions such as people, faces, and vehicles. In the recorded data, you can search for a person by any condition you want, such as gender, top/bottom color. SCREEN lAyOuT Of THE AI SEARCH VIEWER 1.

  • Page 99: Face Recognition Search

    fACE RECOgNITION SEARCH 5. Set the similarity. 6. Select the overlap. You can search for registered face images from the recorded data. It will be displayed when there is overlapped data in one channel by changing the time or time zone at the selected ￭...

  • Page 100: Face Search

    AI search viewer fACE SEARCH VEHIClE SEARCH From the recorded data, you can search faces according to your desired conditions such as gender and age. You can search the vehicle by setting the vehicle type and color conditions from the recorded data. 1.

  • Page 101: Lp Search

    lP SEARCH lPR SEARCH You can search for vehicle license plates from the recorded data. You can search for the license plate number recognized in the recorded data. ￭ LPR search is only available on recorder models that support AI recognition. 1.

  • Page 102: Search Results Export

    AI search viewer SEARCH RESulTS ExPORT Search results such as people, faces, and vehicles can be exported to a file. Example) Person search results export 1. Click < > in the search results list. 2. Select the desired list and click <OK>. ￭...

  • Page 103: Play Search Results

    play PlAy SEARCH RESulTS ExPORT VIDEO by SECTION SETuP You can play the recorded data and export the video you want during playback. You can select the desired section from the time line or search list during video playing and export it to a file. 1.

  • Page 104: Play Button Name And Function

    play Play button Name and function Paused state Playback state Name Description Previous event Go to the previous event video. Previous frame Move backward one frame Playback Play the video. Next frame Moves forward one frame or more. Next event Go to the next event video.

  • Page 105: Setup Viewer

    setup viewer SETTINg THE CAMERA You can configure the Recorder settings remotely on the network. You can check a list of cameras that are connected to the Recorder and configure the necessary settings. SCREEN lAyOuT Of THE SETuP VIEWER For details, refer to the "Setup > Setting the Camera" page in the Table of Contents. Register You can add a network camera(s).

  • Page 106: Camera Setup

    setup viewer Camera Setup Profile Setup You can change the settings of a connected network camera. You can set the profile for a network camera. Setup > Camera > Camera setup Setup > Camera > Profile setup Record You can set the recording profile for a network camera. When you click the <Camera webviewer>...

  • Page 107: Camera Password

    Remote SETTINg THE RECORDINg You can set the video profile transmitted to the network and the expansion monitor. For details, refer to the "Setup > Setting the Recording" page in the Table of Contents. Record Schedule If you set a recording schedule for a specific date and time, the recording will start at that specific time. Setup >...

  • Page 108: Record Options

    setup viewer Record Options SETTINg THE EVENT You can set the hard disk recording option. For details, refer to the "Setup > Setting the Event" page in the Table of Contents. ￭ You can set the recording duration separately for each channel. AI engine Setup >...
  • Page 109 AI recognition Motion detection & IVA You can change the AI recognition event setup. You can change the motion detection and intelligent video analytics event setup. ￭ Settings and operating specifications may differ depending on the recorder model and camera. Tampering detection You can change the tampering detection event setup.

  • Page 110: Event Rule Setup

    setup viewer Event Rule Setup ONVIf Setup You can set the event trigger and action rule to output an alarm when an event occurs. You can set the camera registered with the Onvif protocol. Setup > Event > Event rule setup Setup >...

  • Page 111: Setting The Device

    SETTINg THE DEVICE RAID This function is only available for products that support RAID. You can check a list of devices that are connected to the Recorder and configure the necessary settings. You can set the RAID (Redundant Array of Independent Disks) mode. For details, refer to the "Setup >...

  • Page 112: Monitor

    setup viewer S.M.A.R.T Text You can check the connection status and details of the hard disk mounted in the recorder. You can set the POS device text display and event text settings. Setup > Device > Text Device Relevant values of a POS device connected to Recorder can be set. Monitor You can set the information displayed on the monitor as well as the output system.

  • Page 113: Setting The Network

    SETTINg THE NETWORK DDNS For details, refer to the "Setup > Setting the Network" page in the Table of Contents. You can set DDNS. Setup > Network > DDNS IP & Port A remote user can access the Recorder via the network to check the current mode and the IP address. Setup >...

  • Page 114: Https

    setup viewer HTTPS E-mail You can select a security connection system or install public certificates. You can specify the SMTP server that sends a mail if an event occurs and set the recipient group and users. Setup > Network > HTTPS Setup >...

  • Page 115: Snmp

    Recipient DHCP Server You can set groups and recipients to receive emails. You can set the network camera IP address and check the details by setting up a DHCP server. Setup > Network > DHCP server Network You can set the internal DHCP server and assign an IP address to the network camera. SNMP Using the SNMP protocol, the system or network administrator can remotely monitoring the network devices and sets the environment.

  • Page 116: P2P

    setup viewer SETTINg THE SySTEM This function is only available for products that support P2P. You can configure the various settings of the Recorder system. If you want to use P2P service, check the <Enable P2P> box. For details, refer to the "Setup > Setting the System" page in the Table of Contents. You need to scan the QR code on the screen to use the P2P service.

  • Page 117: User

    user Restriction settings You can set the user permission. You can manage users, such as adding or deleting users and granting different authorities for each user. Setup > System > user Administrator You can change the admin ID or the password. System Management You can check the current system version and update to a new version, export data, setting initialization, and more.

  • Page 118: Log

    setup viewer Settings Event log Using a storage device, you can apply the current configuration of Recorder to another Recorder. The event log lists recorded events, such as sensor events, camera events, or image losses. Press the Initialization button to return the network settings to their factory default state. Items in the <Exception>...
  • Page 119 export viewer SEC bACKuP VIEWER Screen layout of the backup Viewer You can play a file that is backed up in the format of SEC. Backup in SEC format produces backup data file, library file and self-executable viewer file. If you run the backup file viewer, the backup data file will be played. XRN-1620B2_CAM 01 Recommended System Requirements 2020-05-14 20 :54 :13...
  • Page 120 export viewer Name Description Saves the current video's image as in an image file. Supports JPEG file format. Screen Printout Prints out the current screen. You should have installed the appropriate printer driver before you can print out the screen. A toggle button.
  • Page 121 appendix uSE JOySTICK uSINg VIRTuAl KEybOARD The function is only available for the product that supports a joystick. For products that support joy stick, see page 4 "Products supporting each feature” of the Product Specification Manual. The SPC-2000 joystick is operated as follows : 1.
  • Page 122 appendix TROublESHOOTINg Problem Action Problem Action The camera is not connected or the PC fails to connect to the ● Check if the network cable is connected properly. Live video will be slow or cut off. ● The frame number set for multiple data transmission set in camera or network environment product.
  • Page 123 Problem Action Problem Action Exported data cannot be played on a PC or recorder. ● When setting the file format for exporting, first decide whether the device to be played is a PC ● If the sum of input data for each channel exceeds the limit, the alarm icon and the pop up In the live screen, the <...

This manual is also suitable for:

Wisenet xrn-6410rb2-16tb

Table of Contents