Using The Touch Pad; Touch Pad - Panasonic CF-S10 Series Operating Instructions Manual

Using the Touch Pad

Use the touch pad to move the cursor on the screen and perform computer operations.
For information on how to use the touch pad, refer to Preparation and Setting Guide.
Depending on your network environment, it may take approx. 1 minute to start up touch pad utility.
Work Surface (Touch Pad)
Right Button
Left Button
Adjusting the Sensitivity when
Touching the Touch Pad
You can set the touch pad to make it easier
to use by adjusting the 2 sensitivities of
"PalmCheck™" and "Touch Sensitivity."
1
Click
[Hardware and Sound] - [Mouse].
2
Click [Device Settings].
3
Click the device name (e.g.
Synaptics TouchPad) in
[Devices], then click [Settings].
4
Double-click [Pointing],
double-click [Sensitivity], and
click [PalmCheck] or [Touch
Sensitivity].
28
(Start) - [Control Panel] -
•
PalmCheck™
When operating the keyboard, if your hand
touches the touch pad unintentionally
causing the cursor to move, adjust the
sensitivity using "PalmCheck™."
•
By dragging slide bar to the [Maximum]
position, you can prevent the cursor from
moving unintentionally.
•
By dragging slide bar to the [Minimum]
position, you can enable the cursor to
move even with a light touch of the palm
on the touch pad.
•
Touch Sensitivity
When operating the touch pad, if your finger
touches the touch pad, unintentionally
causing the cursor to move; or if the cursor
does not move even when you move
your finger on the touch pad, adjust the
sensitivity using the "Touch Sensitivity"
setting.
•
When slide bar is dragged to the [Heavy
Touch] position, the cursor will only move
with a strong touch on the touch pad.
•
When slide bar is dragged to the [Light
Touch] position, the cursor will move even
with a light touch on the touch pad.
5
After making the adjustment,
click [OK].
6
Click [OK] at [Mouse Properties].