Touch Pad (Basic Operation) - Panasonic CF-37 Series Operating Instructions Manual

Touch Pad
(Basic Operation)
Work Surface
Use the touch pad to move the cursor on the display and perform normal computer operations.
For instructions on how to operate, refer to mS* "Touch Pad (Advanced)''.
/note>
The touch pad has been designed to work only when a finger is used. Therefore, do not use
any implement on the touch pad.
rBasic-Operation~,
r-Handling-theTouch-Pad-n
• Do not place any object on the work surface or press down forcefully with sharp-pointed
objects (i.e. nails), hard objects that can leave marks (i.e. pencils and ball point pen).
• Do not allow things that could dirty the touch pad, such as oil. The cursor may not work
properly in such cases.
• When the touch pad becomes dirty:
Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth first
applied with detergent diluted with water and then thoroughly wrung.
Do not use benzene, thinner, or disinfectant-type alcohol.
13