Table of Contents
Advertisement
Touch Pad
Work Surface
Right Button
Left Button
20
(Basic Operation)
Use the touch pad to move the cursor on the display and perform normal computer operations.
For instructions on how to operate, refer to
Function
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Handling the Touch Pad
By design the touch pad is to be used with a finger tip only. Do not place any object on the
work surface or press down forcefully with sharp-pointed objects (e.g., nails) or hard ob-
jects that can leave marks (e.g., pencils and ball point pen).
Try to avoid having any harmful substances such as oil, come in contact with the touch pad.
The cursor may not work properly in such cases.
When the touch pad becomes dirty:
Wipe to remove dirt by using a dry soft cloth such as gauze or a soft cloth first applied with
detergent diluted with water and then thoroughly wrung.
Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface,
e.g., discoloration. In addition, do not use commercially-available household cleaners and
cosmetics, as they may contain components harmful to the surface.
"Touch Pad".
Touch Pad Operation
Move the tip of your finger lightly
over the surface.
or
tapping
or
double-tapping
or
Two quick taps, but on
While holding down the
the second tap leaving
button, moving your fin-
your finger down (apply-
ger on the work surface.
ing pressure) and moving
it on the work surface.
clicking
double-clicking
Advertisement
Table of Contents
