Boot Menu - Panasonic CF-S10 Series Operating Instructions Manual

Setup Utility
Peripheral Configuration
Menu
HDD Controller
Setting
Optical Drive
LAN
Power On by
LAN
Wireless
Configuration
Menu
PC Card Slot
SD Slot
Menu
USB Port
Legacy USB
Support

Boot Menu

Menu
Boot Mode Select whether to set Boot Mode to high speed (Fast), not set it to
high speed (Normal), or set it to low speed (Compatible) to make
it compatible with certain USB devices. Setting [Fast] will skip the
[Panasonic] boot screen normally displayed immediately after the
computer is turned on. The time required to display the Windows boot
screen will become shorter. Since the [Panasonic] boot screen is not
displayed, press and hold
start the Setup Utility.
This can also be configured in Quick Boot Manager. If the initialization
(Boot Mode) setting or all settings are cleared using Quick Boot
Manager, the [Boot Mode] will be set to [Normal].
If the startup from USB devices is not possible, set [Compatible] and
retry. However, setting [Compatible] will require longer time to display
the Windows boot screen than setting [Normal].
54
Select whether the HDD Controller Setting is set to be [Compatible] or
[AHCI].
Select whether to use the internal CD/DVD drive ([Enabled]) or not
([Disabled]).
Select whether to use the internal LAN ([Enabled]) or not ([Disabled]).
Set whether to use (Allow) or not use (Deny) the Power On by LAN function
that turns on the computer via the LAN. When the power is turned on via
the LAN, the password entry screen is no longer displayed during startup.
Displays a sub-menu related to the settings of the internal wireless
function.
•
Wireless LAN/WiMAX
Select whether to use the internal wireless LAN and WiMAX ([Enabled]) or
not ([Disabled]).
Factory presets: [Enabled]
Press to close the sub-menu.
Select whether to use the PC Card slot ([Enabled]) or not ([Disabled]).
Select whether to use the SD memory card slot ([Enabled]) or not
([Disabled]).
Select whether to use the USB port ([Enabled]) or not ([Disabled]).
Select whether to use the function that makes the computer recognize,
USB keyboard, USB floppy disk drive, and USB CD/DVD drive ([Enabled])
or not ([Disabled]) before starting Windows. This is effective only when
[USB Port] is set to [Enabled], and [Boot Mode] is set to [Normal] in the
[Boot] menu.
Even when [Disabled] is set, the Setup Utility can be operated using the
USB keyboard.
Functions
Functions
Functions
Functions
or and turn the computer on to
Settings
Compatible
AHCI
Disabled
Enabled
Disabled
Enabled
Deny
Allow
Enters the
sub-menu.
Settings
Disabled
Enabled
Disabled
Enabled
Settings
Disabled
Enabled
Disabled
Enabled
Settings
Fast
Normal
Compatible