Security Menu - Panasonic CF-S10 Series Operating Instructions Manual

Menu
Boot Option Set the boot order.
Priorities To change the boot order:
Press
device from the menu.
For example, when starting up from the hard disk drive:
1 Select [Boot Option #1] using
2 Select [Hard Disk] using
You can also set devices to other boot options using the same
operation. If the device set in [Boot Option #1] cannot be recognized,
startup is performed from the device set in [Boot Option #2].
NOTE
•
Panasonic USB floppy disk drive (CF-VFDU03 (optional)) can be used for startup (recommended).
•
To start up in a different priority order from usual for one time only, such as when starting up from the CD/
DVD drive, select a device displayed under [Boot Override] of the [Exit] menu, and press
•
The device for starting up the operating system can also be selected during computer start-up.
Set [Boot Popup Menu] to [Enabled] in [Security] menu beforehand.
1 Turn on the computer.
2 Press
while [Panasonic] boot screen is displayed soon after the computer starts the startup
procedure.
If the [Panasonic] boot screen is not displayed, turn on the computer while holding down
3 Select the boot device and press
•
When starting up from the USB port, confirm the following settings.
•
[USB Port] is [Enabled] in the [Advanced] menu.
•
[Legacy USB] is [Enabled] in the [Advanced] menu.
•
[Boot Mode] is [Normal] in the [Boot] menu.
•
When starting up from the internal CD/DVD drive, confirm the following settings.
•
[Optical Drive] is [Enabled] in the [Advanced] menu.
•
[Optical Drive Power] is [On] in the [Main] menu.
•
[Boot Option #1] is [Optical Drive] in the [Boot] menu.

Security Menu

Boot Prompt Configuration
Menu
Setup Utility When [Setup Utility Prompt] is set to [Disabled], the message "Press F2 for
Prompt Setup / F12 for LAN" is not displayed on [Panasonic] boot screen.
Boot Popup Set whether to display (Enabled) or not display (Disabled) the [Please select
Menu boot device] message that can be displayed by pressing
after startup. When [Enabled] is set, the [Boot Override] item in the [Boot]
menu can be selected, even if a user password was entered when you start
up the Setup Utility.
Password On Set the entry of the supervisor password or user password when starting
Boot up the computer to be required (Enabled) or not be required (Disabled);
or, when [Intel(R) Anti-Theft Technology] is set to [Active] only, to not be
required (Auto).
Password on Never require supervisor or user password entry at Windows restart
Reboot (Disabled), or require password entry based on the [Password On Boot]
setting (Same as Boot).
Functions
on the boot device you want to change and select the boot
or
at [Please select boot device].
Functions
or and press .
and press .
(Underlined items are the factory presets.)
Settings
Hard Disk
Optical Drive
LAN
USB Floppy Disk
USB Hard Disk
USB Optical Drive
Disabled
.
.
Settings
Disabled
Enabled
Disabled
immediately Enabled
Disabled
Enabled
Auto
Disabled
Same as Boot
55