Canon imagePROGRAF iPF6300S Basic Guide No.2 Basic Manual page 49

Error Message
Roll paper is not securely in
contact with roll holder.
Roll feed unit error.
No Roll Unit.
Cause
When the roll was loaded, the roll
was not inserted firmly all the way
on the Roll Holder .
The Roll Feed Unit is not working. Turn off the printer, remove the Roll Feed Unit
The printer has received a print
job, but the Roll Unit is not
installed.
49
Corrective Action
Follow these steps to reload the roll.
1. Press the OK button and remove the roll holder
from the printer.
2. Insert the roll firmly on the Roll Holder until it
touches the flange.
(→ , Loading Rolls on the Roll Holder)
3. Load the Roll Holder in the printer.
momentarily, and then reinstall it.
(→"Removing the Roll Feed Unit," User's Guide)
(→"Installing the Roll Feed Unit," User's Guide)
If the message is displayed again despite these
measures, contact your Canon dealer for assistance.
Press the Stop button to stop printing.
1. Turn the printer off and install the Roll Unit .
Connect the Roll Unit Cable firmly and completely.
2. Turn the printer on and resend the print job.
Error Messages