Replacing The Printhead - Canon imagePROGRAF iPF6300S Basic Guide No.2 Basic Manual

Error Messages
Error Message
This paper cannot be used.
Cannot print as specified.
Please calibrate using above
paper.
Manual printing is selected.
Manual printing is selected, but
a roll is loaded.
Cause
Paper that is too large for the
printer has been loaded.
Paper that is too small for the
printer has been loaded.
Paper has been loaded that is too
small to print the test pattern for
printhead adjustment or nozzle
checking.
The loaded paper is too small.
(When you are attempting to print
a test print sheet or other printer
status information.)
It has become the time for
prompting the execution of color
calibration.
This is displayed when paper is
loaded in the printer and Prompt
Execution is set to On on the
Control Panel menu.
You have attempted to print on a
sheet, but no sheet is loaded.
A print job for printing on sheets
was sent when a roll is loaded.
36
Corrective Action
Press the OK button and load paper of the correct
size.
(→"Paper Sizes," User's Guide)
Press the OK button and load paper of the correct
size.
(→"Paper Sizes," User's Guide)
Press the OK button and load unused paper A4/Letter
(vertical) or larger. More than one sheet may be
required depending on the adjustment.
Replace the paper with paper of A4/Letter (vertical)
size or larger as follows.
1. Press ▲ or ▼ to select Change Paper , press the
OK button, and remove the paper.
(→ , Removing Sheets)
2. Switch to paper A4/Letter (vertical) or larger.
(→"Loading and Printing on Sheets," User's Guide)
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing , and then press
the OK button to stop printing.
Execute color calibration.
(→"Using Color Calibration for Color Adjustment,"
User's Guide)
Set Prompt Execution to Off on the Control Panel
menu.
(→ , Menu Map)
Press ▲ or ▼ to select Load Paper , and then press
the OK button. Load a sheet, and then print.
(→"Loading and Printing on Sheets," User's Guide)
Press ▲ or ▼ and select Stop Printing or press the
Stop button to stop printing.
1. Press ▲ or ▼ to select Remove Roll Paper , and
then press the OK button to stop printing.
2. After removing the roll, load and print on a sheet of
the type and size of paper you have specified in the
printer driver.
(→ , Removing the Roll from the Printer)
(→"Loading and Printing on Sheets," User's Guide)
Press ▲ or ▼ to select Stop Printing , and then press
the OK button to stop printing.