Canon imagePROGRAF iPF6300S Basic Guide No.2 Basic Manual page 3

Large-format printers
Hide thumbs Also See for imagePROGRAF iPF6300S Basic Guide No.2:
Table of Contents

Advertisement

Phenomenon
Roller marks are left across the
trailing edge of paper
Margins are wide
Printing Does Not Start
Phenomenon
The Data lamp on the Control
Panel does not light up
The printer does not respond even
if print jobs are sent
Ink Filling.. is displayed
The display screen indicates
Agitating
Cause
The paper was removed without
pressing the OK button after
printing from the Front Paper
Feed Slot .
Rolls are advanced a specific
amount before cutting to prevent
problems with cutting and paper
ejection.
Cause
The printer is not on.
The target printer was not selected
when printing. (The printer is in
Sleep mode.)
The print job is paused. (The
printer is in Sleep mode.)
In the Control Panel menu, Pause
Print is On .
You have selected Save in mail
box in Output Method on the
printer.
Print jobs are pending.
The printer was forced off during
operation.
Ink agitation is in progress.
Corrective Action
Following the instructions displayed, press the OK
button, and after removing the paper, press the OK
button again.
Wipe the rollers to clean them.
(→
, If Paper is Soiled)
(→"Cleaning the Paper Retainer," User's Guide)
This operation is normal.
Corrective Action
Make sure the power cord is securely plugged in, all
the way. Press the Power button to turn on the printer.
In Windows, select the printer by clicking Select
Printer or Printer in the printing dialog box and try
printing again.
In Mac OS X, open the dialog box of the printer driver,
select the printer from the list of Printer , and try
printing again.
In Windows, restart the print job as follows.
1.
Select the printer icon in the Printers and Faxes (or
Printers ) window.
2.
Clear Pause Printing in the File menu to restart the
print job.
In Mac OS X, restart the print job as follows.
1.
Click Print & Fax . (This is identified as Printer
Setup Utility or Print Center in other versions of
Mac OS X.)
2.
Select the printer, and then Resume Printer (or
Start Jobs ) in the Printers menu to restart the print
job.
Set Pause Print to Off .
(→"Pausing Printing," User's Guide)
Print the job saved on the printer's hard disk.
(→"Printing Saved Jobs," User's Guide)
Manage the jobs on hold and print as needed.
(→"Managing Pending Jobs (Printing or Deleting Jobs
on Hold)," User's Guide)
Wait until the system has been filled with ink.
Please wait until ink agitation is finished.
The time for agitation varies depending on how long
the printer was off. (Between about 30 seconds and
two minutes.)
3
Troubleshooting

Advertisement

Table of Contents
loading

Table of Contents