Canon FAXPHONE B95 User Manual page 105

Message
CLEAR PAPER JAM
DATA ERROR
DOC. TOO LONG
ECM RX
ECM TX
MEMORY FULL
MSG DATA LOST
9-16
Cause
There is a paper jam.
An error has occurred and all
one-touch speed dialing, coded
speed dialing, and user data
have been lost.
The document is longer than
27.5 in. (700 mm).
The fax is receiving a document
using Error Correction Mode
(ECM).
The fax is sending a document
using Error Correction Mode
(ECM).
The fax's memory is full because
it has received too many
documents, or a very long or
detailed document.
The fax's memory is full because
you either tried to send or copy
too many pages at once, or you
tried to send or copy a very long
or detailed document, using
memory sending.
An error has occurred and all
voice message data has been
lost.
Action
Clear the paper jam (see p. 9-
1) and reload paper in the
multi-purpose tray. Press
[Stop].
Press [Start/Copy], then re-
register the data (see Chapter
2).
Use a copier to make a
reduced copy of the document
and then send the copy.
ECM receptions may take
longer than normal receptions.
Turn off ECM if you need to
receive quickly, or if you know
your local lines are in good
condition (see ECM RX, p. 8-
4).
ECM transmissions may take
longer than normal
transmissions. Turn off ECM if
you need to transmit quickly,
or if you know your local lines
are in good condition (see
ECM TX, p. 8-3).
Print any documents stored in
memory (see p. 5-14).
Then start again.
Free up space in the fax's
memory by printing or deleting
any documents in memory you
no longer need (see pp. 5-14,
5-15).
If multiple pages are loaded,
separate the pages into
smaller stacks. If not, try
sending the document by
direct sending (see p. 5-2).
Re-record all answering
machine messages, such as
the outgoing message and
alternative outgoing message
(see p. 7-1).