Canon FAXPHONE B95 User Manual page 87

TAM SETTINGS
Name
MESSAGE LENGTH
PASSWORD
TOLL SAVER
RING COUNT
FWD SETTINGS
FWD TEL NUMBER
AUTO REDIAL
PIN ENTRY
TAM MONITOR
CALLER ID
Name
CALLER ID
ANONYMOUS
SELECTIVE
OUT OF AREA
SHOW IN HISTORY?
8-6
Description
Set the maximum recording time for each recorded message.
Set a four-digit PIN so that you can access the fax from
remote locations.
Setting this feature to ON allows calls to be picked up after 2
rings when you have a new message.
If you set TOLL SAVER to OFF, this feature allows you to set
the number of times the fax rings.
Allows you to forward messages.
Forwarding telephone number
A maximum of 40 digits can be entered.
Redial the previously dialed number.
REDIAL TIMES: Set the number of retries.
REDIAL INTERVAL: Set the period of time between redialing
attempts.
PIN confirmation
Allows you to screen all incoming calls.
Description
Determine if the fax displays the caller's name and phone/fax
number when receiving a call.
Allows you to reject anonymous calls.
REJECTION METHOD: Set the way the fax rejects calls.
Allows you to reject calls from specific numbers.
NUMBER TO REJECT (00-09) : Set the phone/fax numbers to
be rejected. A maximum of 20 digits can be entered.
REJECTION METHOD: Set the way the fax rejects calls.
Allows you to reject out-of-area calls.
REJECTION METHOD: Set the way the fax rejects calls.
Determine if the fax stores the phone/fax numbers for rejected
calls.
Settings
0 seconds/30
seconds/60 seconds/
120 seconds
0000 to 9999
ON/OFF
1 to 15 times
ON/OFF
–
ON/OFF
1 to 10 times
2 to 99 minutes
ON/OFF
ON/OFF
Settings
ON/OFF
ON/OFF
DISCONNECT/
PLAY MESSAGE
ON/OFF
_
DISCONNECT/
PLAY MESSAGE
ON/OFF
DISCONNECT/
PLAY MESSAGE
YES/NO