Philips AquaTrio Cordless 9000 Series Manual page 4

Hide thumbs Also See for AquaTrio Cordless 9000 Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
-
Do not clean the removable parts of the appliance in the dishwasher. These parts are not dishwasher-
proof.
-
Do not clean the white material of the filter holder with a normal vacuum cleaner or a brush to avoid
damage to the material.
-
Always use the vacuum cleaner with the filter assembled.
-
When you clean the washable sponge filter with water, make sure it is completely dry before you put it
back into the filter holder and dust container. Do not dry the sponge filter in direct sunlight, on the
radiator or in the tumble dryer. Do not clean the filter holder with water. This part is not washable.
-
Replace the filter if it can no longer be cleaned properly or if it is damaged (see 'Ordering accessories').
-
Never use any accessories or parts from other manufacturers or that Philips does not specifically
recommend. If you use such accessories or parts, your warranty becomes invalid.
-
Make sure that the appliance is installed with the after-clean and storage station assembled according to
the instructions in the user manual.
-
Make sure that the appliance is installed with the wall mount attached to the wall according to the
instructions in the user manual.
-
Be careful when you drill holes in the wall to attach the wall mount, to avoid the risk of electric shock.
-
Do not hold the Vacuum & Mop set-up upside down as this will cause water to leak through the air
openings of the 3-in-1 handheld. If this does happen, the appliance can still function safely.
-
In rare cases, when the appliance performs the AUTOCLEAN cycle, it may happen that the appliance
suddenly stops working in an environment with electrostatic discharge. Then, you can restart the
AUTOCLEAN function by pressing the middle button (Fig. 2).
-
As this appliance uses water to clean, the floor may remain wet and slippery for a while (Fig. 3).
Battery safety instructions
-
Only use this product for its intended purpose and follow the general and battery safety instructions as
described in this user manual. Any misuse can cause electric shock, burns, fire and other hazards or
injuries.
-
Only charge the appliance with the adapter supplied. Only use 34V adapter S036-1A340100HE. The
corresponding adapter number can be found on the adapter.
-
Charge, use and store the product at a temperature between 5 °C and 35 °C.
-
Do not expose the device to direct sunlight or to high temperatures (near hot stoves, in microwave ovens
or on induction cookers). Batteries may explode if overheated.
-
If the product becomes abnormally hot or smelly, changes color or if charging takes longer than usual,
stop using and charging the product and contact Philips.
-
Do not place products and their batteries in microwave ovens or on induction cookers.
-
When you handle batteries, make sure that your hands, the product and the batteries are dry.
-
To prevent batteries from heating up or releasing toxic or hazardous substances, do not modify, pierce or
damage products and batteries and do not disassemble, short-circuit, overcharge or reverse charge
batteries.
-
To avoid accidental short-circuiting of batteries after removal, do not let battery terminals come into
contact with metal objects (e.g. coins, hairpins, rings). Do not wrap batteries in aluminum foil. Tape
battery terminals or put batteries in a plastic bag before you discard them.
-
If batteries are damaged or leaking, avoid contact with the skin or eyes. If this occurs, immediately rinse
well with water and seek medical care.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations regarding exposure to
electromagnetic fields.
English
7

Advertisement

Table of Contents
loading

Table of Contents